picture request

[big bear]

irons

Bassett Machine, KISS

I have put Sadlak on mine with low rings 3-9Zeiss, 1"scope. had to take the iron sights off though. Do you have high rings on yours?Mount was relatively cheap, holds zero and works just fine, so I'm happy as is, but if i did want iron sights too , it would be nice to know if different rings would do it.

 

[RifleDude]

 

[cim330]

scout version

 

[gnmontey]

I have put Sadlak on mine with low rings 3-9Zeiss, 1"scope. had to take the iron sights off though. Do you have high rings on yours?Mount was relatively cheap, holds zero and works just fine, so I'm happy as is, but if i did want iron sights too , it would be nice to know if different rings would do it.

See w w w.bassettmachine.com

Iron sights

Using the Standard High Scope Mount, a 65mm outside diameter objective bell will clear the hand-guard by 1.5mm. This measurement was taken at 6.5 to 7 inches forward of the mounting bolt center with the recommended Weaver rings. This allows for using the iron sights.

Using the Picatinny Rail High Scope Mount, a 50mm outside diameter objective bell will show a little in the iron sites but you can see enough to use them

 

[chemo]

we're gonna need a close up on that scout mount cim330 !

 

[Sirenjoe]

 

[cim330]

we're gonna need a close up on that scout mount cim330 !

It's the springfield forward scope mount.

 

[Fenix.NZ]

scout version

i wasnt going to go down this road with my new m14 .. you're a bad person lol

p.s which model lupie have you got on there ?

 

[roberti11]

Here are the Twins...

My Rifle..

Here is what it looked like in its first life,

http://www.shootershaven.net/M14Norinco.html

I used it that way for a year or so and then returned it to it's native wood

My Sons...

 

[cim330]

i wasnt going to go down this road with my new m14 .. you're a bad person lol

p.s which model lupie have you got on there ?

I apologizes

The scope is FX-II 2.5x28mm scout

 

[alexD92]

Norinco M-14S (M-305) 2007
USGI Walnut stock
scope mount with 2 big knobs
weaver rings
Bushnell 3200

Shoots nicely, I did ~1-2 inches when I sighted her for hunting, I've neglected her since then. She's been sitting in the safe for a while.

Took her in the bush that day, was awesome.

 

[homer76]

Trijicon Accupoint 3-9x40mm w/Mil Dot (Wolverine Supplies).
Bassett Manufacturing M1913 Railed Mount (Direct)

Dimitri

I also have a Trijicon Accupoint 3-9x40 except mine has the BAC red triangle with the ARMS 18 mount and ARMS 22 medium throw lever rings.

 

[H2O MAN]

An old picture I had forgotten about.

 

[snipz]

here are my 2 M14s.....with my AR and Savage......