Please help??

M

maka

Regular
Rating - 100%
12   0   0
Location
Southern Ontario
Hi guys

I will try this again.

I have a M&P 9mm

I am trying to get my mags to go into an CR versa Mag pouch

It will not stay with any of the given spacers. Two are to thin and one is to thick.

What should I do. These things are not one size fits all as they claim to be. I was told by seller that it will work for me. Any suggestions.

maka
 
For my M&P in 40 S&W I had the same problem. They are more a "one size fits all when it was designed" product. Although I didn't buy the pouches for it I ended up modifying the inserts a bit. My main use for the pouches is for an STI so I didn't touch those inserts. Instead I ended up cutting off the "tab" and putting a plastic washer or two in between it and the pouch. Seemed to work OK.

Let me know if you need more details as I don't have the pouch in front of me right now.


Fudd
 
I don't have any M&P mags here, or I'd tell you exactly what to do, but I'll contact the manufacturer and check for you. I'm sure one or a combination of two of the spacers should work.
 
Freedom Ventures said:
I don't have any M&P mags here, or I'd tell you exactly what to do, but I'll contact the manufacturer and check for you. I'm sure one or a combination of two of the spacers should work.
Click to expand...

Actually it is the one you sent to Ontario last week. It got here Friday morning. Thanks again.

I actually went to home depot and got some small flat rubber washers. Working great know. There is no combination that will work for the spacers provided.

The little wedge that comes with them is that for wedging tight the pouch on the belt??

Wally
 
They were a little loose on my mags as well, so since I had a crap-load of those little clear plastic spacers they put in fishing tackle/parts boxes lying around, I just cut up a few of those and they worked great.
 
You must log in or register to reply here.
Back
Top Bottom