plz. Explain me SB PMII turrets.

[Mush]

In the manual it says that you have to loosen the 2 screws and pull the cap and retighten those screws. Fire and adjust zero then do the inverse.

Is it Ok to just fire, adjust zero and then pull the turret to align the arrow to the zero mark ?

How does it work ?

Mush

 

[ultimate_monkey]

1) losses the 2 set screws
2) lift turret about 1/8" and re tighten screws
3) sight in like normal
4) loosen screws and re-zero the turret
5) push turret back down and tighten set screws

If you don't do that way the windows for 1st/2nd rev indicators and zero stop won't be indexed or set correctly



If you're useing the MTC, LT model

1) sight in like normal
2) loosen set screws
3) dial to zero making sure the 2nd rev detent is down
4) re tighten set screws

 

[Mush]

Thanks a lot. !
I'll follow then manual then.
I appreciate your explainations.

Mush