PMC ammo

Please please please get some 7.62X51 or .308 bulk non Corro, no steel (brass) ammo in :)

Anything you can order that matches those details, I'm pretty sure it will get whipped up. FAST. Mostly from me lol.
 
I had no luck with PMC 50 bmg. Out of the hundered rounds I have fired there have been 13 failure to fire! And I still have another hundered to go!
 
rwgorman said:
I had no luck with PMC 50 bmg. Out of the hundered rounds I have fired there have been 13 failure to fire! And I still have another hundered to go!
Click to expand...

Have you tried some American Eagle 50 BMG? Or, if the COL is not an issue for you, maybe some Hornady A-MAX.
 
rwgorman said:
I had no luck with PMC 50 bmg. Out of the hundered rounds I have fired there have been 13 failure to fire! And I still have another hundered to go!
Click to expand...

Really? That is really odd, my experience with it has been quite the oposite with the PMC bronze 660 grain .50BMG.

What gun did you fire it from? Light primer strikes or anything obvious?

Mine has >200 rounds down the pipe, not one misfire, hangfire, or bad cartridge in any way. Shoots just over MOA in my gun, which for the cost, I am more then happy to accept.

I like the stuff so much I just picked up two more cases from Target sports today, cleared them out. (Got a semi auto coming soon, so consumption will increase)
 
rwgorman said:
I had no luck with PMC 50 bmg. Out of the hundered rounds I have fired there have been 13 failure to fire! And I still have another hundered to go!
Click to expand...

I'd heard that about PMC .50 as well. I'm through about 30 rounds of a hundred with no problems so far. The ones I have are stamped PSD 11, and the boxes are marked 50A-0021. Good and bad batches?
 
Kevin M. said:
Really? That is really odd, my experience with it has been quite the oposite with the PMC bronze 660 grain .50BMG.

What gun did you fire it from? Light primer strikes or anything obvious?

Mine has >200 rounds down the pipe, not one misfire, hangfire, or bad cartridge in any way. Shoots just over MOA in my gun, which for the cost, I am more then happy to accept.

I like the stuff so much I just picked up two more cases from Target sports today, cleared them out. (Got a semi auto coming soon, so consumption will increase)
Click to expand...

Better get ready for the semi's big brother the "Typhon 20" :)
 
Have you tried some American Eagle 50 BMG? Or, if the COL is not an issue for you, maybe some Hornady A-MAX.

No I havent tried it, the only thing I whave been able to find is the PMC 50 bmg. All of my hand loads work just great. I am was only getting about 1.5 to 2 moa out of my PMC stuff. THe primers are struck hard, Im firing it aout of the new AI. Ill try smoe Amax when they come into the country. THe PMC brass also requires alot triminmg for reloading compared to the winchester brass I was using. Still going to keep on firing it, 6 bucks a round you cant go wrong and then when you reload it, it is alraedy fire formed to the chamber. My relaods are down to about .75 moa, and now I am just waitng for more bullets form the states to get finsih off my reload testing!
 
"I'd heard that about PMC .50 as well. I'm through about 30 rounds of a hundred with no problems so far. The ones I have are stamped PSD 11, and the boxes are marked 50A-0021. Good and bad batches?"

I running the same lot too, 50A-0021,
 
You must log in or register to reply here.
Back
Top Bottom