Post your Beretta 1301 Tacticals

[dogzilla]

Started with the GGG rem 870 stock adapter:

Wasn't a huge fan of the mismatched fde and the longer grip of the 870 SGA.

Decided to go with black handguards and the airdus Mossberg Sga stock

Build list:
-Airdus stock adapter (much cleaner look than the GGG)
-Airdus crom mount with Rob Haught half ghost ring sight
-Holosun 508T with circle reticle
-Black OEM handguard (very grippy, don't need any lights or attachments)
-SJ hardware magazine extension in fde
-beretta pro lifter (much easier to load now)
Only thing missing is the tacord metal charging handle, the OEM one is plastic and looks like a buttplug

Where did you source the black oem forend?

 

[1ABNDT]

Where did you source the black oem forend?

I've sourced them on the EE, PM cgn members who have switched to the aftermarket fore end to see if they want to sell the OEM fore end.


Or try Al Flaherty's, Stoeger.
# C8D876


Or have a friend or relative order from BUSA and send it to you via USPS.

 

[panaan25]

All these look great. Are the mag extenders just for show? We’re only allowed 5 x 3” shells / 6 x 2 3/4 shells right?

 

[Jake1911]

All these look great. Are the mag extenders just for show? We’re only allowed 5 x 3” shells / 6 x 2 3/4 shells right?

They're +1s for 5.9 rounds of 3 inch, gets you an extra 2 3/4 in there

 

[dasilnei]

WOW! All the builds look amazing, has anyone tried to install the Kick-Off stock on the 1301 Tactical???

I saw a YouTube video where someone did, and he said it definitely reduced felt recoil! - https://www.youtube.com/watch?v=1gYvjrGoEis&t=1801s

I wanted to do the same, however it looks like the length of pull will be increased by the kick-off stock and may be counter productive.

any thoughts?

 

[armybuck041]

Here's mine:

I've since swapped out the EOTech for a Burris Fast Fire 3.

 

[1ABNDT]

WOW! All the builds look amazing, has anyone tried to install the Kick-Off stock on the 1301 Tactical???

I saw a YouTube video where someone did, and he said it definitely reduced felt recoil! - https://www.youtube.com/watch?v=1gYvjrGoEis&t=1801s

I wanted to do the same, however it looks like the length of pull will be increased by the kick-off stock and may be counter productive.

any thoughts?

Beretta stock # C8A437
https://www.beretta.com/en-us/colle...cs/beretta-stock-a400-xtreme-black-camo-12ga/

This is the Beretta Stock A400 Xtreme Black Camo 12GA

http://www.berettausa.com/products/kick-off-system-xtrema-2/

. It minimizes barrel movement during recoil and retains your sight picture better. It does add about 1/2" to the LOP.

 

[mbk]

Great looking builds in here. I'm thinking this will have to be the next one on my list

 

[Hypox!a]

Here's mine:

I've since swapped out the EOTech for a Burris Fast Fire 3.

Be careful with this setup. The 1301 receiver is aluminum, you put enough rounds through it and the EoTech will sheer off that rail from the bolts and receiver.

 

[armybuck041]

Be careful with this setup. The 1301 receiver is aluminum, you put enough rounds through it and the EoTech will sheer off that rail from the bolts and receiver.

As mentioned in the original post, I've ditched the EOTech and gone to a Burris Fast Fire 3.

 

[rmsg0040]

WOW! All the builds look amazing, has anyone tried to install the Kick-Off stock on the 1301 Tactical???

I saw a YouTube video where someone did, and he said it definitely reduced felt recoil! - https://www.youtube.com/watch?v=1gYvjrGoEis&t=1801s

I wanted to do the same, however it looks like the length of pull will be increased by the kick-off stock and may be counter productive.

any thoughts?

Beartooth products and limbsaver both have slip on recoil pads.

 

[1ABNDT]

Here's mine:

I've since swapped out the EOTech for a Burris Fast Fire 3.

I can look at the 1301 all day and not be disappointed, even if it's not mine.

 

[armybuck041]

I can look at the 1301 all day and not be disappointed, even if it's not mine.

Thanks! Totally agreed.

Here she is with the Burris fitted:

 

[1ABNDT]

Very nice.

 

[armybuck041]

Very nice, but your sharpness of the pic is too good(#'s) If you catch my drift.

Yikes! Fixed

 

[1ABNDT]

Ty, sir.

 

[canuck]

Mines pretty simple, not too much bling
This thread reminds me that she hasn't been out of the safe in a while, maybe a workout in her near future

 

[1ABNDT]

Mines pretty simple, not too much bling
This thread reminds me that she hasn't been out of the safe in a while, maybe a workout in her near future

Nice, get that heart pumping

 

[darrensousa]

Can’t thank Casey and TacOrd enough.

 

[1ABNDT]

I’ve put a lot of rounds through this thing. Can’t thank Casey and TacOrd enough.

Sweet. And ty to Tacord for R&D parts for the 1301T