Precision/Sniper/Tactical

6241746080_IMG_0617.jpg

6241746080_IMG_0611.jpg


Pretty intense recoil, most of you guys couldn't handle it.
 






Rem 700 Magpul edition .260 Rem. has the 5R 22" barrel.
Grayboe Renegade stock in GAP camo, Tac-pro cheek riser. Hawkins Precision M5 bottom metal.
Weaver 20MOA base, Weaver tactical rings, Weaver Tactical 3-15x50 scope
Just waiting on the Triggertech trigger that I have on order
 
6.5cm barreled action from Reliable Gun plus bits and pieces from my spare parts bin:

https://1.bp.########.com/-FAbV1zyoKHo/WccNxqzYlJI/AAAAAAAAqEg/ZRxsJGqjaNc3KBThY6jeIXGir9B1DL1YQCKgBGAs/s1600/P9231922.JPG
 
You guys just need to do some renos on your house and you too can have a nice “spare parts” bin :p

Lol, spare parts bin builds don't require fibbing to the wife, only big purchases :)

https://2.bp.########.com/-cvr0or4TxsQ/WcnnT-vEUnI/AAAAAAAAqJY/UAGaRIiC-VA1NNVfB4Ap0_CV2wf0NPdcQCKgBGAs/s1600/P9241937.JPG
 
I just picked this one up today from ATRS.
It's a Stiller TAC338 action with 25" Krieger barrel chambered in .338 Norma Magnum with ATRS brake.
Has a Manners stock, 45moa Near rail, 15moa Near Alpha mount and an ATACR 5-25X56. I should be able to dial up to 2150m.
Timney Calvin Elite trigger.
I'll get some nicer pics when there isn't a raging blizzard outside and I can go to the range.

mgRCl3w.jpg
 
Last edited:
Got the 6.5 barrelled into the chassis and took her out for a test drive this past weekend. Not too bad out of of the box, first round hits on steel at 480m, 680m, and 850m. Struggled at 1,195, but that's because I'm not a very good shooter, the rifle itself is capable of first round hits as two of my pals with similar builds managed to do it.

https://3.bp.########.com/-gFuP6pefT8I/WduuRg9piVI/AAAAAAAAqlA/118xD_c2KtMsnIbMb-8POFAL1Or8YLYBwCKgBGAs/s1600/PA082302.JPG

https://2.bp.########.com/-zbI61BvAtVc/WduuRgPiObI/AAAAAAAAqlA/KC6a4xKEvOc3O1TheI7H3Rs8XtoLU4PLACKgBGAs/s1600/PA082304.JPG

https://1.bp.########.com/-oSmfcDh1vnI/WduuRg2g1UI/AAAAAAAAqlA/LgDQujYhADkeh3AsJ-o13w0xWtsAZ5wbwCKgBGAs/s1600/PA082314.JPG

Also had a few other toys out as well. The 338:

https://2.bp.########.com/-XpLwXWQORTM/WduuRnC07pI/AAAAAAAAqlA/5sOcX4E3l6svJKb5_rhY-Rjpe5gWOvExwCKgBGAs/s1600/PA082323.JPG

https://4.bp.########.com/-1rFDebIP02o/WduuRlK4msI/AAAAAAAAqlA/fCJ5607f_tccP5HJK-dDmKfQK8MYSwaUgCKgBGAs/s1600/PA082328.JPG

https://1.bp.########.com/-8UcCFDlCto8/WduuRvdMxrI/AAAAAAAAqlA/JdIBh5w83wE1j7P7vW1Bp67qs4outPFMACKgBGAs/s1600/PA082331.JPG

https://1.bp.########.com/-FVL_Iy1IQXo/WduuRsTQkfI/AAAAAAAAqlA/J2bUXxfrQsYufs_CEQWbmCowB2QHLJkswCKgBGAs/s1600/PA082332.JPG

https://4.bp.########.com/-9aehyp_0Xn0/WduuRhtklnI/AAAAAAAAqlA/oFv6mZVybzQHjU5JtycDEZDThDAojTh2gCKgBGAs/s1600/PA082330.JPG

https://1.bp.########.com/-q2suIrWARec/WduuRqeme2I/AAAAAAAAqlA/wXV1un0pftAUITu8zDaKpQIMnTXQ3F7gwCKgBGAs/s1600/PA082187.JPG

The 50

https://3.bp.########.com/-3SQkNTRg4zQ/WduuRmDMOAI/AAAAAAAAqlA/juZ0QIOVADUnyG0gGI9IGTAukPUwRakTgCKgBGAs/s1600/PA082186.JPG

https://3.bp.########.com/-0vWRgt8Erz0/WduuRk_h0rI/AAAAAAAAqlA/N9j7-Pjm1D4w_XIUm-fafExk6bes5azIgCKgBGAs/s1600/PA082185.JPG

https://4.bp.########.com/-Xf19gdCC1Po/WduuRsTKaKI/AAAAAAAAqlA/m6IzmywOeQMnOr4b307giTPBj_8bK5B4wCKgBGAs/s1600/PA082256.JPG

https://1.bp.########.com/-zTV###vrKyA/WduuRrCrFoI/AAAAAAAAqlA/pIK8Z2G35acoU8CQfHv0r-9FUaYD736LQCKgBGAs/s1600/PA082258.JPG

https://1.bp.########.com/--W9ZuN1KDzY/WduuRoAz-tI/AAAAAAAAqlA/zdDwk03g9VATcd6-DJ1lGYbnCw59ZLt7ACKgBGAs/s1600/PA082259.JPG


https://3.bp.########.com/-ZYI6pzKh4Hk/WduuRuHFVvI/AAAAAAAAqlA/ury4Ft8CGfYu4FC6oci3dTOdGD_GoVAEgCKgBGAs/s1600/PA082276.JPG
 
Had a new toy arrive yesterday afternoon.

PGWDTI Coyote in .260 Rem.
Ordered it with the Pelican hard case, 4 ten round mags, LRA Bipod, and cleaning kit.
Flat black action/barrel and Flat Grey folding stock.

Awesome service from the PGWDTI crew!!!!!


Xd47qbP.jpg

gZAbs5Y.jpg

BlXpRCm.jpg

a5GXvzk.jpg
 
Got the 6.5 barrelled into the chassis and took her out for a test drive this past weekend. Not too bad out of of the box, first round hits on steel at 480m, 680m, and 850m. Struggled at 1,195, but that's because I'm not a very good shooter, the rifle itself is capable of first round hits as two of my pals with similar builds managed to do it.

https://3.bp.########.com/-gFuP6pefT8I/WduuRg9piVI/AAAAAAAAqlA/118xD_c2KtMsnIbMb-8POFAL1Or8YLYBwCKgBGAs/s1600/PA082302.JPG

https://2.bp.########.com/-zbI61BvAtVc/WduuRgPiObI/AAAAAAAAqlA/KC6a4xKEvOc3O1TheI7H3Rs8XtoLU4PLACKgBGAs/s1600/PA082304.JPG

https://1.bp.########.com/-oSmfcDh1vnI/WduuRg2g1UI/AAAAAAAAqlA/LgDQujYhADkeh3AsJ-o13w0xWtsAZ5wbwCKgBGAs/s1600/PA082314.JPG

Also had a few other toys out as well. The 338:

https://2.bp.########.com/-XpLwXWQORTM/WduuRnC07pI/AAAAAAAAqlA/5sOcX4E3l6svJKb5_rhY-Rjpe5gWOvExwCKgBGAs/s1600/PA082323.JPG

https://4.bp.########.com/-1rFDebIP02o/WduuRlK4msI/AAAAAAAAqlA/fCJ5607f_tccP5HJK-dDmKfQK8MYSwaUgCKgBGAs/s1600/PA082328.JPG

https://1.bp.########.com/-8UcCFDlCto8/WduuRvdMxrI/AAAAAAAAqlA/JdIBh5w83wE1j7P7vW1Bp67qs4outPFMACKgBGAs/s1600/PA082331.JPG

https://1.bp.########.com/-FVL_Iy1IQXo/WduuRsTQkfI/AAAAAAAAqlA/J2bUXxfrQsYufs_CEQWbmCowB2QHLJkswCKgBGAs/s1600/PA082332.JPG

https://4.bp.########.com/-9aehyp_0Xn0/WduuRhtklnI/AAAAAAAAqlA/oFv6mZVybzQHjU5JtycDEZDThDAojTh2gCKgBGAs/s1600/PA082330.JPG

https://1.bp.########.com/-q2suIrWARec/WduuRqeme2I/AAAAAAAAqlA/wXV1un0pftAUITu8zDaKpQIMnTXQ3F7gwCKgBGAs/s1600/PA082187.JPG

The 50

https://3.bp.########.com/-3SQkNTRg4zQ/WduuRmDMOAI/AAAAAAAAqlA/juZ0QIOVADUnyG0gGI9IGTAukPUwRakTgCKgBGAs/s1600/PA082186.JPG

https://3.bp.########.com/-0vWRgt8Erz0/WduuRk_h0rI/AAAAAAAAqlA/N9j7-Pjm1D4w_XIUm-fafExk6bes5azIgCKgBGAs/s1600/PA082185.JPG

https://4.bp.########.com/-Xf19gdCC1Po/WduuRsTKaKI/AAAAAAAAqlA/m6IzmywOeQMnOr4b307giTPBj_8bK5B4wCKgBGAs/s1600/PA082256.JPG

https://1.bp.########.com/-zTV###vrKyA/WduuRrCrFoI/AAAAAAAAqlA/pIK8Z2G35acoU8CQfHv0r-9FUaYD736LQCKgBGAs/s1600/PA082258.JPG

https://1.bp.########.com/--W9ZuN1KDzY/WduuRoAz-tI/AAAAAAAAqlA/zdDwk03g9VATcd6-DJ1lGYbnCw59ZLt7ACKgBGAs/s1600/PA082259.JPG


https://3.bp.########.com/-ZYI6pzKh4Hk/WduuRuHFVvI/AAAAAAAAqlA/ury4Ft8CGfYu4FC6oci3dTOdGD_GoVAEgCKgBGAs/s1600/PA082276.JPG


Hi, what’s the sphur mount model number for the 338 with a razor gen ll on it?
Myself got a razor gen ll in spuhr mount, and was wondering if it’s compatible for full rail setup as it looks tight
Cheers
 
Hi, what’s the sphur mount model number for the 338 with a razor gen ll on it?
Myself got a razor gen ll in spuhr mount, and was wondering if it’s compatible for full rail setup as it looks tight
Cheers

Here you go :)

https://1.bp.########.com/-H5GHu-aTYcw/Wcnno5szGPI/AAAAAAAAqJc/nZYuEMX4uLEgL0vHFHX8Hf02SrBZKs4jgCKgBGAs/s1600/P9241970.JPG
 
Back
Top Bottom