So about 4 months ago I started to get bored with my Spikes 14.5" AR. It was still fun to shoot but I had just started getting into precision shooting and the idea of a tack driving AR got me all excited. Over the next few months I planned on upgrading the barrel,handguards,trigger,stock and optic.
So here's what I started with.
Completely stock Spikes 14.5" AR with a PEPR mount holding a Hilux CMR.
Here's where I ended up.
Things that were changed:
ATRS custom 18" barrel in .223 wylde with a 1 in 7 twist, rifle length gas system.
Diamondhead USA 13.5" handguard
AR Gold trigger
Magpul PRS
Sightron SIII 8-32
ADM quick release mount
Ergo deluxe grip
Today was the first day I was able to get out to the range without the wind blowing like mad.
Here was some of the results. All shots were at 100yds from a bench using bags.
Honestly I was going to be ecstatic with anything that was sub MOA, especially on the first time out. I didn't count a couple of the Flyers because those were caused by the loose nut behind the gun. Also would appear that the gun likes 24.5-25gr of CFE 223. I was using remington brass and 70gr berger VLD. I also have some 77gr berger OTM to try out.
So to say I'm happy with the results is an understatement, and couldn't wait to share the results.
So here's what I started with.
Completely stock Spikes 14.5" AR with a PEPR mount holding a Hilux CMR.
Here's where I ended up.
Things that were changed:
ATRS custom 18" barrel in .223 wylde with a 1 in 7 twist, rifle length gas system.
Diamondhead USA 13.5" handguard
AR Gold trigger
Magpul PRS
Sightron SIII 8-32
ADM quick release mount
Ergo deluxe grip
Today was the first day I was able to get out to the range without the wind blowing like mad.
Here was some of the results. All shots were at 100yds from a bench using bags.
Honestly I was going to be ecstatic with anything that was sub MOA, especially on the first time out. I didn't count a couple of the Flyers because those were caused by the loose nut behind the gun. Also would appear that the gun likes 24.5-25gr of CFE 223. I was using remington brass and 70gr berger VLD. I also have some 77gr berger OTM to try out.
So to say I'm happy with the results is an understatement, and couldn't wait to share the results.


















































