Proper Fit for Dlask SR-22 Rail Set

[Tehoke01]

I just received my 4 rail set for my SR-22 from Dlask, I know some others have had to do some shimming on the top rail...

...well, mine fit perfectly, as did the bottom rail BUT, the two side rails are either too short(sit too low) and/or the threads on the supplied screws stop too far from the head of the screw to fit solidly against the handguard.

I shimmed it using 22 gauge stainless hanger strapping. I had to shape/form the straps using a ball-peen hammer and the inside of a steel pipe(cut in half), that had same radius as the handguard.

I "touched up" the edges of the strapping up with a permanent marker so it wouldn't show.

Has anyone else had this problem with the Dlask side rails for their SR-22?

 

[CHAO5]

Yes, I was annoyed, but ahwell.

 

[carsmovies]

I just got my full set the other day and it fit perfectly.

 

[Danimal247]

Pics to see how far of? I was considering the same rails

 

[jasonn]

I have some rails on the way. hope they fit properly.

 

[Bullwhip]

My set fits fine.

 

[haywire_scorpio]

My set also fit flawlessly..

 

[legendboy]

Mine are perfect

 

[Danimal247]

I bought dlask rails and I can honestly say I've never bought anything in my life that fit so perfectly, tolerances are tight yet every single piece fit flawless (bolts dropped right into their threads, no wiggling necessary). 1000% happy with them

 

[walihntr]

X 2 ... great Canadian product

 

[Boomer686]

Ordered some stuff from Dlask for my SR-22 today as well... hope it goes together a-ok!!!

Regards,

 

[ryanmacneil8448]

I went and picked up a 12.5" bull barrel and top rail. The quality on the barrel and the rail where amazing for the price fit was perfect, staff where nice. Only change I would make is the barrel makes the gun front heavy so maybe fluted barrel would take down the weight a little

 

[Danimal247]

I went and picked up a 12.5" bull barrel and top rail. The quality on the barrel and the rail where amazing for the price fit was perfect, staff where nice. Only change I would make is the barrel makes the gun front heavy so maybe fluted barrel would take down the weight a little

I agree, they should make an M4 profile-style barrel with a threaded muzzle in a matte finish, 12.5" and .750" at the muzzle

 

[Mambo]

I went and picked up a 12.5" bull barrel and top rail. The quality on the barrel and the rail where amazing for the price fit was perfect, staff where nice. Only change I would make is the barrel makes the gun front heavy so maybe fluted barrel would take down the weight a little

Any pics of said pieces installed? I'm thinking of a shorty 22 for ####s and giggles...they look like so much fun! I'm intrigued right now with this SR-22!