Anyone tried these bullets or compared them to the 69 grain matchkings? I have a sweet load capable of the .2 to .3 range at 100 but couldn't help but notice how these are $10 less per 100. Any experience is appreciated. Thanks
PRVI 69 grain hpbt vs matchking?
- Thread starter laker415
- Start date
You gave up after 50?
Reading many of your past posts you seem to be very inquisitive and enjoy testing and experimenting. They must have been bad.
I have some 120gr. 6.5 hpbt I use in my Swedes, and they seem ok. Construction and finish are not up to Sierra's standards though.
I have a load built up using ivi brass and WC735 that is easily under moa out of a 1 in 7" twist. I would never pass up a good deal on these bullets. I have loaded at least 1000 and have never been disappointed. Now it seems that WC735 has gone the way of the Dodo, so I will now experiment with W748, CFE223 and such, but I have confidence that another good load is out there.
