PU Optical Sights - Reproduction

Riflechair

CGN Ultra frequent flyer
Location
BC
Dear Sergey
Will 1" rings fit these reproduction scopes?

The original PU optic is 1.045" and 1" rings are a bit of a stretch to fit them.
Curious to know if the repro scopes (Ukraine?) are compatible with 1" rings or if 1" rings mar the finish on the scope tubes?

I have a PU optic / M1A youtube video project under way right now.
Just looking for the right optical sight to make this work.
Not sure if repro or original PU is the way to go.
I have done a lot of testing with one specific new production Russian optic by VOMZ and it did not work out well, so I am looking for other options now.

Thanks for your time.
RC
pu3_5h22.gif

[h=1]Rifle M44 M38 91/30 Mosin PU Scope[/h] [h=2]$124.00[/h] Hunting scope PU 3,5x22 is intended for mounting on different types of sporting and hunting weapon. Scope may have a diameter of a slot of 25,4 or 26,5 mm.

The scope has two hand wheel with scales for making necessary corrections in vertical and horizontal planes when zeroing in and firing.
The scope can be used under the ambient temperature from -40 to + 40 C and relevant humidity not more than 93% at the temperature 25 C.

Specifications
Magnification, x 3.5
Field of view, deg 4.5
Exit pupil 6
Eye relief 72
Diopter adjustment, d from -0,5 to -1
Mount diameter 25,4mm or 26,5mm
Value of an upper hand wheel point, deg/cm/100m 6.2/7
Value of a side hand wheel point, deg/cm/100m 8.85/10
Overall dimensions, mm 170x42x42
Weight, kg 0.4
 
Hello Rifllechair it would not work for you if you tried vomz already. All of the scopes in Russia have the same standard. Tell me more about your project by email or call me Mond to Friday at 604-940-6264.

AL
 
Back
Top Bottom