Question about Sako rifle

[338winmag]

I have a Sako Finnlite 300wsm. I noticed the back of the bolt seems loose. I went to chamber a round and the firing pin would not engage. After a few attempts, the indicator was out and showed it was loaded. It fired ok but I feel somethimg has come loose. Anyone else ever had is problem? Any suggestions? Thanks in advance.

 

[25tikka]

I had the same thing happen on a new sako shortly after I received it. I pulled the action/barrel out of the stock and found a small piece of packing foam interfering with the sear engagement. Cleaned it out and never had another problem

 

[jumper]

Sako trigger Problem

The trigger assembly sometimes needs leveling vs. the receiver. There is a pin, adjusting screw and a lock screw.

 

[blargon]

Does it have the "Key Concept" on the rear of the bolt? Could be an issue there...