9mm Major Update
Well have done more testing with 9mm major.
I have reloaded my torture test brass for the fourth time and shot it on the weekend. No problems with pressure, primer pockets are still tight. Going to reload it for the 5th time and try it again on the weekend. I am not anticipating any problems.
With another batch of brass, I made an adjustment to the load. I have reduced the OAL to 1.160 and am currently trying Federal Small Pistol Primers. Powder is 6.8 grains of Longshot pushing an Aim 124 grain bullet.
Power factor dropped to 168, due to the change in primer. This is a real accurate load and very soft to shoot.
Will keep you informed as I do more testing.
DVC
Well have done more testing with 9mm major.
I have reloaded my torture test brass for the fourth time and shot it on the weekend. No problems with pressure, primer pockets are still tight. Going to reload it for the 5th time and try it again on the weekend. I am not anticipating any problems.
With another batch of brass, I made an adjustment to the load. I have reduced the OAL to 1.160 and am currently trying Federal Small Pistol Primers. Powder is 6.8 grains of Longshot pushing an Aim 124 grain bullet.
Power factor dropped to 168, due to the change in primer. This is a real accurate load and very soft to shoot.
Will keep you informed as I do more testing.
DVC
I have shot 38 super, 9x40, and now I am moving to 9mm major.
I have not experienced any problems that have been mentioned in this thread.
I have been torture testing the same lot of brass to see how many reloads that I can get out of it. I have reloaded the brass three times so far, with no issues. I am seeing no pressure signs on the load. Going to load it for the fourth time and head again this weekend.
My current load is:
6.8 grains of longshot
1.170 overall length
170 Power Factor
The load is very soft and accurate.
Going to continue to experiment and try some other powders.
Will keep you informed to the progress.
DVC




















































