Question on Ljungman cleaning kit tools

[Keithjohn]

I have two kits w/spare parts etc , in one the chamber tool has some kind of fine thread wound around it and it seems misshaped. In the other one this tool has no thread on it , it looks like a threaded bolt in the shape of the chamber.
Question #1-. Does anybody know what this thread material is and how to wined it on to get it the right shape to clean the chamber ?
Question #2 - Where can I find instructions on the multifunction tool ? I know one function is to help with installing a new extractor but what else is this used for ?

 

[Keithjohn]

I guess the one tool is only for the extractor, but still looking for material and techniques to make chamber tool useful

 

[Innercity]

This may shed some light.
https://www.dropbox.com/s/wl2nlplkxy2lrmm/AG42B%20Manual.pdf?dl=0

Just don't lube your cases like the manual suggests.
The multitool with the pin wrench is for removing the muzzle cover and has a blade screwdriver for adjusting the front sight once the cover is removed.

 

[Keithjohn]

Thanks but the picture in the manual shows the chamber tool only not how to wind it to the right shape or what material to use to refurbish it . On my other one it seems to be some kind of really fine thread . Maybe it shapes itself when a guy starts spinning it in the chamber . The bare tool looks like an all thread bolt with a smaller all thread for the neck welded on. The one with the material on it is rally uneven and would only clean the chamber at the high spots . Wish I could post pics

 

[zuke]

 

[mkrnel]

 

[zuke]

Perhap's the "thread's" are to make sure the patch stay's on the tool?