Quick mkII disassembly question

[TangoSixNiner]

This may seem like a real amature question but i don't want to break something.
I'm trying to take my new savage mkII bv apart to play with the accutrigger. I removed the front assembly stud and the stock assembly stud. How to i remove the REAR assembly stud? I dont see any access to it. Without it removed i cant see to remove the barrel and action together.

Help?

 

[drache]

give me a couple minutes and I'll take a picture of the manual for you.

 

[TangoSixNiner]

thanks, Ive found a version on savages website showing the parts breakdown, if that's what your going to show me?

 

[drache]

In the manual it shows only two screws that you have to remove for taking the stock off. This might not help too much but I'll post it anyways.

 

[TangoSixNiner]

Thanks for that.
I did take out those exact two screws. Does your stock remove easily at that point? something is holding it on at the very rear point where the rear stud is...

 

[drache]

All I had to do was take out the two screws and pull the entire action straight up out of the stock.

 

[TangoSixNiner]

If you don't mind, do you think you can take a picture of the action removed from the stock, and a picture inside the stock? If not, don't worry about it at all..Just if your bored haha.
I'm gonna give it another try, really afraid to break something though

 

[drache]

give me a couple minutes and I'll post up the pictures

 

[drache]

here are the pics:

Just make sure to lift STRAIGHT UP, if you lift the front of the barrel instead, the trigger will get caught.

 

[TangoSixNiner]

Thanks! Much appreciated
Eventually got it out with some force..I think its just never been taken apart before

 

[drache]

Yeah the first time I took mine apart it was in there pretty solid but once I did it, every time after was really easy.

Glad you got yours out.