Quick Release scope mounts for Sako AV

T

Toomanyguns

Regular
EE Expired
Rating - 100%
13   0   0
Location
BC
I am interested in using a set of quick release scope mounts on a Sako AV long action rifle.

Suggestions from those with actual experience would be much appreciated.:)
 
I have not used them on the Sako AV, but have used them on other rifles.

Overall, I'm not impressed with QD mounts. They cost more and are heavier than normal versions and I've found that the are prone to "quick-releasing" on thier own. I've taken to usign red loctite on mine (steel warne ~$80, and steel weaver ~$45).

I won't be buying QD again.
 
Leupold Sako, small light. You just need a multi tool or screwdriver to get them off. Put a small mark on the receiver, because of the taper they go back pretty close. I used to look at them as quick release but not necessarily return to zero
 
Talley makes a set. Bases are about $40, rings about $130 or so. Nice set-up, very solid and well made. I had them on an AV in 375 H&H.

What scope do you plan to attach? I had a Leupold 2.5-8x36 on there and it barely fit, short tube on that one. Something to consider as I don't believe they make an extension type ring.

Talk to Clay at Prophet River, he'll set you up.
 
bearkilr said:
Talley makes a set. Bases are about $40, rings about $130 or so. Nice set-up, very solid and well made. I had them on an AV in 375 H&H.

What scope do you plan to attach? I had a Leupold 2.5-8x36 on there and it barely fit, short tube on that one. Something to consider as I don't believe they make an extension type ring.

Talk to Clay at Prophet River, he'll set you up.
Click to expand...

That is the exact scope I have. Yes indeed a short tube on that scope. As long as it fits - barely - I'll be a happy camper. Thanks for advice.
 
woodlotowner said:
Why?
Click to expand...

In the event that I have to venture into 12 foot high willows and alder thickets to retrieve a grizzly bear. Experience has taught that open sight are better for me in that situation.

Furthermore, the rifle has open sights and I wish to have the versatility of open sight or scope.

Did that answer your question?
 
MTM said:
Leupold Sako, small light. You just need a multi tool or screwdriver to get them off. Put a small mark on the receiver, because of the taper they go back pretty close. I used to look at them as quick release but not necessarily return to zero
Click to expand...

Thanks MTM. If no return to zero then it defeats the purpose for me. In that case we may just stick with open sights.

Maybe I get lucky on a 5-15 draw this year.:)
 
Toomanyguns said:
In the event that I have to venture into 12 foot high willows and alder thickets to retrieve a grizzly bear. Experience has taught that open sight are better for me in that situation.

Furthermore, the rifle has open sights and I wish to have the versatility of open sight or scope.

Did that answer your question?
Click to expand...

Ah, yes. I understand. I wasn't trying to be obnoxious, it's just that my experience with 'quick release' mounts in the past required a sighting in each time they were 'quick remounted'. I was disappointed and wanted to save you the grief. I expect that if you use high end rings you may have better success. I'd be interested to know what you end up with and how they work (i.e. return to zero). :)
 
Toomanyguns said:
Thanks MTM. If no return to zero then it defeats the purpose for me. In that case we may just stick with open sights.

Maybe I get lucky on a 5-15 draw this year.:)
Click to expand...

Good luck on the draw and if you need someone to tag along let me know.
I've used Warnes, Talleys and Leupolds. Don't know whats available for Sakos. They're nice but why aren't you shooting a Mod. 70? Hahaha
 
the only QD rings for a Sako dovetail that were worth a s**t were the old style Talleys that mounted directly on the square bridges. You might try and call talley and see if they have a set laying around.

Barring that, Talley and Leupold make bases that drive on and accept their steel QD rings. The Talleys would end up awfully high, even with low rings though, and I personally find the idea of driving a base onto a base to be something I prefer not to have on one of my own rifles.

Another option that would work is to get a set of the original Sako rings that look like this http://www.gunbroker.com/Auction/ViewItem.aspx?Item=212365850

they are windage adjustable, but it would be no big trick to locktite or stake the offside solid, and then if you are reasonably adept enought to tighten the thumbscrews evenly they will return to zero. The rear ring has a stud that fits in the slot at the very rear of the rear dovetail that will locate the rings repeatedly.
 
woodlotowner said:
Ah, yes. I understand. I wasn't trying to be obnoxious, it's just that my experience with 'quick release' mounts in the past required a sighting in each time they were 'quick remounted'. I was disappointed and wanted to save you the grief. I expect that if you use high end rings you may have better success. I'd be interested to know what you end up with and how they work (i.e. return to zero). :)
Click to expand...

There is nothing worse than trudging fearfully through tall, wet, snow covered willows and coming upon heavy, laboured breathing and rustling - you shoulder the rifle and discover the scope is fogged.:eek:
 
Toomanyguns said:
There is nothing worse than trudging fearfully through tall, wet, snow covered willows and coming upon heavy, laboured breathing and rustling - you shoulder the rifle and discover the scope is fogged.:eek:
Click to expand...

I have seen scary movies and laughed, but your descriptive use of language will account for my lack of sleep tonight. I won't watch the movie when it comes out either. Good luck with the rings :)
 
You must log in or register to reply here.
Back
Top Bottom