Rail to fit ruger m77

[live4therut]

Hello nutters I'm looking for a 0-20moa rails for a friend he has a ruger m77 with lack of better word "different" base on top of the action. What are his options?

 

[live4therut]

No one knows?

 

[Grinch]

The only choices would be to grind off the Ruger base and have the action drilled and tapped, or have a custom base made to fit Ruger's configuration. I had a similar situation with a Sako L691 and Joe Dlask made a 20 MOA base that slid over the dovetails. Check him out at www.dlaskarms.com or 605 952 0837.

 

[dthunter]

Livefortherut:
If you look on the Burris website, they make a weaver adapter for the Ruger rifles.
You put the adapter on and mount the burris rings that have self aligning bushings.
This will allow you to adjust the scope angle, instead of using a 20MOA rail.
Check thier web site, it will solve you problem bud.

 

[live4therut]

Thanks guys, it's not my problem, I'm set for hunting season! I'm going to tell him to get another rifle, sounds easier

 

[dan belisle]

Does his 77 have the built in Ruger mounts, or is it one of the early ones that was drilled and tapped? - dan

 

[bigmedicine]

Ken Ferrell makes rails for the Ruger. I just put one on my M77 mk11
It sets right over the integral mounts, you just have to drill and tap 4 holes and you are ready to mount your rings. Mine is awesome and he ships quckly $130.00

 

[gregc]

i picked up a top rail at p/d in edmonton for my ruger m77 in 30/06. the rails just screw into the ruger slots on the top of the action, allowing you to use whatever set of rings you want. price was about 80$

 

[RockChucker]

Egw advertises a 15 or 20 MOA rail to fit the Ruger M77 Long action nothing for the short action.

RC