Raven hyper fire not resetting

[45C]

Hey
My raven wouldn’t reset the trigger , also got a couple of doubles.
No matter what gas setting.
Brass was landing at 5 o’clock in a neat pile about 7 ft away.

Also wondering what the small set screw that’s just under the top set screw , is for?

Edited : got it all sorted out.

Thanks


Nosler varmageddon 55g looks promising/ something to work with.View attachment 738745View attachment 738746

 

[redflagmat]

There’s two set screws on the side from my memory. One is for the tactile feed back for the gas block adjustment, and the other is a locking mechanism to keep the gas block set at the adjustment chosen

 

[45C]

There’s two set screws on the side from my memory. One is for the tactile feed back for the gas block adjustment, and the other is a locking mechanism to keep the gas block set at the adjustment chosen

Thanks, I got that part figured out, gonna try and get the trigger to work next.

 

[the radium king]

can you get the trigger to reset by manually cycling the action?

sounds like it is short-stroking - bcg not moving far enough back to push the hammer down into the disconnector. more gas.

 

[45C]

can you get the trigger to reset by manually cycling the action?

sounds like it is short-stroking - bcg not moving far enough back to push the hammer down into the disconnector. more gas.

Yes it would reset manually, but I disassembled and the small sear spring was not sat in there right.
Corrected that and it now functions properly.