jmichelin84
CGN Ultra frequent flyer
- Location
- Big Land, nL
id love to get a 7.62x51mm if i could, to smooth out a ar barrel
Reamer Exchange Thread? (Reamer bank) & other tools barrel / action wrenches & vices
- Thread starter Ardent
- Start date
hifiwasabi
Regular
- Location
- I live in a giant bucket.
Looking to borrow, rent or buy a .303 British field gauge and 79 degree crown cutter with pilot for my Enfield project.
6mm Shooter
CGN Regular
- Location
- White City, SK
Looking for a 22-250 reamer and gauges
Ardent
CGN Ultra frequent flyer
Have .25 Gibbs and a no go gauge, if you want to try doing the neck and throat with a throater and .270 Win reamer.
I need a .375 H&H reamer, if anyone has one to rent.
Ardent
CGN Ultra frequent flyer
I have a .25 Gibbs reamer, same shoulder position, if you have a .30-06 reamer and throater it will work.
Looking for rent or borrow a hand throating reamer for 223Rem cal.
Has Shilen SS precision barrel with SAAMI spec chamber and 1:8” twist rate.
The OAL for SMK 80GR is only 2.30”. The idea is to convert my SAAMI chamber to Wyldy one. Free bore diameter is .2241-.2242”. Hand cutting is preferred.
I noticed that there are 2 types of these reamers: with straight and spiral fluting. Please advise which one has the best performance.
The other question is a lead angle. There are big varieties of angles in 1 to 3 deg range. Wyldy has 1deg-15’.
As SMK 80GR will be my primer bullet please suggest the optimum angle.
Any comments and suggestions will be greatly appreciated.
Thanks in advance,
alex
P.S. GTA is preferred
Has Shilen SS precision barrel with SAAMI spec chamber and 1:8” twist rate.
The OAL for SMK 80GR is only 2.30”. The idea is to convert my SAAMI chamber to Wyldy one. Free bore diameter is .2241-.2242”. Hand cutting is preferred.
I noticed that there are 2 types of these reamers: with straight and spiral fluting. Please advise which one has the best performance.
The other question is a lead angle. There are big varieties of angles in 1 to 3 deg range. Wyldy has 1deg-15’.
As SMK 80GR will be my primer bullet please suggest the optimum angle.
Any comments and suggestions will be greatly appreciated.
Thanks in advance,
alex
P.S. GTA is preferred
m14medic.ca
Expried Business Member
- Location
- Regina SK Canada
Hello,
I’m looking for a 223 AI reamer.
Willing to rent or buy.
I searched this thread, and it only came up once (back in 2012) so I didn’t want to PM the poster from such an old post...
John
I’m looking for a 223 AI reamer.
Willing to rent or buy.
I searched this thread, and it only came up once (back in 2012) so I didn’t want to PM the poster from such an old post...
John
- Location
- Edmonton area, Alberta
Looking to borrow a 9mm luger reamer to touch up a chamber with a ding near the breech face. I'm in Edmonton.
Still looking. The one I bought disappeared into the mail.
Still looking. The one I bought disappeared into the mail.
Last edited:
If you find one I could sure use it .I have a double rifle in 45-70 with wonky chambers i want to rechamber and reregulate.
cheers Gary Flach
