Reaming chamber

My feelings on this is I like the gun when it works it shoots into less then a inch if I do my part. It has shown extraction issues from day one. First go around they reset headspace worked for what maybe 60 to hundred rounds ( I wasn't keeping track) Sent it off this spring for hard extraction They polished chamber. Got it back first round no extraction. Can chamber rounds and extract fine if unfired. tried Federal/Remington/ Nosler no problem. fire any of them no extraction. All the factory loads have no signs of pressure all have been fired in my Savage10 BAS/T and My M1A no problems. From What I can see chamber is not smooth. but that is hard to judge. And yes I have checked my rail mounting and no there ore no screws threads into action/bolt chamber. So To Me it seems to be a chamber issue. I was extremely reluctant to send it off as first time was around a full year gone. 2nd time about a month. but I sent it direct myself first time was through the distributor. so now it is 3 times out for repair. To me it is a chamber issue from new and it is warranty and I don't think I should be paying. but I was trying to get some insight from some more experienced people on here. I got some good advise and some not so good. I also had a few that jumped on somethings I said and right away It all was my fault. I took it all in and decided as long as Savage is willing to try and find and fix the issue I am going to deal with them. I just hope I live long enough to see it. lol
 
If it still won't run after 3 trips tell them you want a replacement.Don't get too attached to one gun as all Savage CF bolt guns will shoot MOA with ammo they like.Harold
 
You must log in or register to reply here.
Back
Top Bottom