Redding bushing outside neck diameter

N

Nubuun

New member
Rating - 96.4%
27   1   0
Does anyone know the outside diameter of a redding bushing ( .288 or .287 in particular)trying to figure out if they will fit in my Rcbs bushing dies. The redding ones are a lot easier to come by, I can onlu find the rcbs bushing on brownells and I would rather not place another order with shipping and the exchange rate

Thanks
 
All my Redding bushings - steel or coated - are one thou over 1/2 inch.

Hope this helps.

20160911_144712_zpszklcyhjv.jpg
 
I just measured the rcbs bushing I have and it's exactly 1/2 inch, so one thou smaller than the redding ones, I'm thing the redding bushings should work as I believe there's a little play inside the die to allow the bushing to centre and 1/1000 is the tolerance on most calipers.
Thanks everyone for the help. Time to spent more money on bushings....
 
You must log in or register to reply here.
Back
Top Bottom