Redding Competition Seating Die + Forester Co-Ax Press

[Radical!]

Hoping someone could shed some light on the subject.
Will The Redding .308 Competition Seating Die work with the Forester Co-Ax Press. Just want to make sure it has sufficient clearance for operation.

Any Help will be appreciated.
Thanks Robert

 

[Niko]

I suppose that it may depend somewhat on the caliber. I use the Forster micrometer benchrest dies in 308 with no problems on my CoAx. Shouldn't be a problem for you unless you're maybe loading 50bmg. Hope this helps.

 

[Radical!]

Yes, the caliber is .308, I'll edit the post.
Thanks, Nico

 

[buckbrush]

I believe the .308 one will work but some redding comp seating dies will not. Sinclair used to state which redding dies worked in the co-ax in their catalog.

I have found the Forester benchrest micrometer seating dies to be just as accurate as Reddings.They are cheaper than the Reddings but are not as nicely finished as the Reddings.

All of the Forester dies will fit the Co-ax press.

 

[Radical!]

I believe the .308 one will work but some redding comp seating dies will not. Sinclair used to state which redding dies worked in the co-ax in their catalog.

I have found the Forester benchrest micrometer seating dies to be just as accurate as Reddings.They are cheaper than the Reddings but are not as nicely finished as the Reddings.

All of the Forester dies will fit the Co-ax press.

I'll Just go with the Forester benchrest micro seating die and make things easier. With the reviews I've read, both the Redding and the Forester mic/seating dies perform the same. Thanks for your help Buckbrush.