Redding neck sizer die bushing

R

Ramondo

New member
Rating - 100%
62   0   0
I am getting curious about the redding necksizer die bushing and would like to aquire various sizes as well as any information that someone may have on there use and satisfaction----Many Thanks in advance for any help on this matter Ray
 
Not just the redding neck die most of them work in the same way. You may need 2 or 3 bushings the goal is to size the neck down so it's 2 or 3 though smaller than the bullet to be seated for good neck tension.
 
My thanks for your reply I have been having problems with the neck tension on several of my reload projects and was wondering if neck bushings would solve my problem your response answered my problem exactly and I again thank you for your response-----Ray
 
Thank you for your response you have just confirmed my thoughts on acquiring neck sizzing die bushings and will get onto that project just as soon as I can figure out what size bushings I will require---my thanks again -------Ray
 
measure your necks on loaded rounds, if they all vary by a few thou you may have to skim turn your necks first before you will ever get consistent neck tensions, this could also be a good sign that it is now time to anneal your brass again as they are all suffering different amounts of spring back after sizing
 
You must log in or register to reply here.
Back
Top Bottom