I'm Looking For Load Data For Reloading Barnes X Bullets (not Tsx) For My 270win.just Bought 200 Of The Old Barnes X Bullets Cheap.they Are 150 Grain.i Heard There Is Some Problems With Fouling With These Bullets .i Guess I'll Have To Clean The Barrel A Little More Often.any Help Appreciated.
reloading- barnes x for 270 win
- Thread starter larry56b
- Start date
make sure you start out with a clean barrel before shooting too, or you might find accuracy inconsistent from the start
IMR 4350 or H4831sc should be a good fuel for 150s in a 270
the Barnes #2 manual shows :
IMR 4350 - start load 48.5 grains (2702 fps), max load 52.5 grains (2925 fps)
H4831sc - start load 54 grains (2739 fps), max load 58.0 grains (2942 fps).
If you got a chrony, beware of any loads faster than 2850-2900 fps in a 22-24" tube, they'll be getting up there in pressure
IMR 4350 or H4831sc should be a good fuel for 150s in a 270
the Barnes #2 manual shows :
IMR 4350 - start load 48.5 grains (2702 fps), max load 52.5 grains (2925 fps)
H4831sc - start load 54 grains (2739 fps), max load 58.0 grains (2942 fps).
If you got a chrony, beware of any loads faster than 2850-2900 fps in a 22-24" tube, they'll be getting up there in pressure
beretta boy
CGN Ultra frequent flyer
- Location
- Orillia, Ontario
"Cleaning" means with a product designed to remove copper fouling,
like Sweet's 7.62 or Barnes CR-10.
like Sweet's 7.62 or Barnes CR-10.
