Reloading manuals that include 9.3x62 load data?

R

rmcda

Regular
Super GunNutz
Rating - 100%
105   0   0
Location
Vancouver, BC
I am getting started in re-loading and would like to purchase a manual that includes 9.3x62 loads.
I have heard that the Lyman manual is pretty good but doesn't contain any 9.3x62 load data.

Anyone know which, (if any) manual includes 9.3x 62. If not, any suggestions / opinions on load data web sites that charge an annual subscription?

Thanks for your input.
 
my lee as it, however when you get dies stay away from hornady (personal experience) and get a crimping die. Following the Lee book my AOL is too long. Actualy the sholder are just too wide. It would be ok If I had a crimping die.
 
OAL is not a problem with most rifles, except for the "commercial" HVA M/94/38 based ones.
The magazine lenght is more or less 3.260", so it also won't accept most commerically loaded ammo, except the Norma ones, as their max OAL never reach that lenght.
Unlike sometimes specified, the Max. CIP OAL is 83.60mm (3.290", not 3.340" as sometimes quoted in the US)

As for which manual containing datas for the 9.3X62;

ADI
Barnes
Hodgdon (one of the best sources)
Hormady
Lee (mostly copies from others)
Lapua
Norma
Nosler
Speer

There are also loading datas in Ken Water's Pet Loads and Big Bore Rifles and Cartridges, plus many other published articles.
 
Be less expensive to do a net search than buy a manual for one cartridge.
"...Lee (mostly copies from others)..." All of their data is from Hodgdon, as I recall. Lee does no load developement at all.
 
You must log in or register to reply here.
Back
Top Bottom