Rem mcs conversion magazine 14 and 18 inch standard bbl

badboybeeson

CGN Ultra frequent flyer
Business Member
Rating - 97%
612   19   5
Location
East ontario
Well it,s finally finished and perfect.
want to use a standard Remington 870 bbl on a remington 870 MCS?
Either original or one made buy us?
We are now able to offer magazine extension with threadded nut that will allow you to use a 14 inch or 18-inchPlus factory bbl.
These are machined out of 4140 HTSR steel and use a steel threaded retention nut.
The shoulder was brought forward to meet with the bbl lug.

These units have had the final T&E and will be going for cerakoting tomorrow.


.
1000010533.jpg
1000010530.jpg
1000010531.jpg
 

Attachments

  • 1000010532.jpg
    1000010532.jpg
    32.2 KB · Views: 24
Last edited:
So, is the barrel lug on an mcs further ahead?
Is it the same as those no name Chinese built "homeland 780"s that sfrc had years ago?
no nothing like that, the mag tube on the mcs is shorter, 3 rounds not 4, so the lugs on mcs bbls are set back.
this will let you use any standard 870 bbl on the mcs, eaitheroriginal or one build by us
 
A small update, after reviewing out cycle time on the first run and total cost to produce these, we have been able to lower the retail prics by about 14%.

new price,
$139.99 for the unit that fits flush with standard 14 inch bbl. MCS +2
154.99 for the MCS +3 for 19 inch or longer bbls
 
Back
Top Bottom