rem700 action screws torques

[300ultramag]

does someone know the torque values for a rem 700??

 

[RockChucker]

HS Precision stock with the bedding block and allen head screws = 65 inch pounds. Please take note INCH Pounds.

 

[knockknock]

Yup what he said INCH pounds 65 for the HS stocked rifles, about 45 for wood or laminated stocks or non piller bedded McMillans.
Typically anything with pillers is also 65 INCH pounds.
KK

 

[Ian Robertson]

Or about 75 for a Robertson stock, pillars or not.

 

[knockknock]

Or about 75 for a Robertson stock, pillars or not.

No worries about crushing the fiberglass?? I have not yet had the opporrtunity to use 1 of your stocks but plan to in the near future. I have had some issues with crushing the glass filler in some other big name fiberglass stocks, that pillers ofcourse negate that.
KK

 

[highspeedlowdrag]

about 45 for wood or laminated stocks or non piller bedded McMillans.

The McMillans with "sniper fill" should be fine at 65 inch lbs. All of the FN SPR's that wear them are torqued at 65 inch lbs from the factory (and all of these stocks are made with the heavier fill)...

hsld.

 

[Ganderite]

I don't think wood should be torqued over 35 in pounds. I torque metal pillars to 65.