Remington 7400 and 750

What is the difference?
The Remington Model 750 is the direct successor to the Model 7400 (produced roughly 1981–2005), running from 2006 to about 2015–2016 with gas-system, bolt-head, and forend updates. [1, 2, 3, 4]

Gas system: The Model 750 moved the gas block rearward and used a 45-degree angled gas port to cut down on fouling and keep bolt cycling more consistent. [1, 2]
 
The 750 was preceded by the 7400, which was itself an update from the 742 Woodsmaster/740 series of semi-autos. The 750 was the last updated iteration of the 7400 and the last semi Remington made. A lot of folks didn't like em, favoring the Browning BAR. The 742 was often called the "Jamo-matic" as it had a propensity to jam. However, these guns were perfectly serviceable rifles so long as they were well maintained. Reason they jammed was due to improper maintenance, particularly when brought in from the cold and allowed to sweat. The chambers would most always rust and this would cause the fired cases to stick. Many were forced open and the extractors got broken. Others were problematic with improper ammunition. One had to keep in mind these were designed as a hunting rifle. They were not designed for continuous fire! Most of the ones I worked on or rebuilt were plenty accurate. If you can find one in good shape, it is a classic deer rifle.
 
Back
Top Bottom