Remington MCS Clones at Dlask Arms Corp.

Dlask Arms said:
Are you asking for a 14 inch barrel but with the lug at the 10 inch location ?
Click to expand...

Couldn't resist any longer, gave in and ordered one of your 10" 870 models the other day. Been staring at them for sometime now, really happy you still had one left.
Would love to see another barrel option for these beauty's like you described above if possible in the future...
 
We have stripped down some donor guns already and once the Bren 2 parts rush is over I will push to modify them to make some of the 8.5 and 10 inch versions. You guys have been very patient and for that I say - THANK YOU. These guns will come and so will stand along barrels. Just so many things to do and so little time to do them...

We *may* have something special coming as a collaboration with another vendor that is pretty cool but right now we are all herding ducks around to try and make it happen for y'all. ( :
 
No name said:
Thanks for the update and really looking forward to whatever products you got brewing over there :)
Click to expand...

Well it's about damn time to get out some 870's. This has been a monkey on my back for about a year now, since the last run sold out. Sorry again for the delay but they are incredibly time consuming to make so we need to MAKE the time and that's not always financially feasible unfortunately.
 
Dlask Arms said:
Well it's about damn time to get out some 870's. This has been a monkey on my back for about a year now, since the last run sold out. Sorry again for the delay but they are incredibly time consuming to make so we need to MAKE the time and that's not always financially feasible unfortunately.
Click to expand...

You'll want to be stocked up on 870 and TUF-22 production when the day comes to reopen the 1911 and AR lines!
 
Dlask Arms said:
Are you asking for a 14 inch barrel but with the lug at the 10 inch location ?
Click to expand...

Yes, I have most of an MCS, all the stocks, 18 and 10” barrels. The 14 is by far the hardest to find in Canada, as the imported guns all seemed to have the 18 and you’ve made some 10’s in the past.

If you want to go crazy the 11” breacher would be cool too.
 
Hey Leigh,

I'm sure there is a better spot to ask this question, but this looks to be the last 870 thread. Hoping you or someone can steer me in right direction.

I currently have a Dlask 870 barrel and I'd like to add one of the Magpul forward sling mounts. Not sure if you are familiar with these, but they come in a 870 and 590A1 version. I had issues with the V1 S&J hardware barrel clamp on the Dlask barrel as it is a lot thicker than factory 870 barrels.

Any idea if the magpul 870 version would fit, or if it would be safer to buy the 590A1 version to account for the thicker barrel?

Thanks in advance for your help!
 
The dlask barrels don’t fit well with the MCS forend because of the profile/thickness, I’ve experienced this with a few different dlask short barrels

Even the factory 870 barrel clamp has two versions. One with an X stamped on it and one without.

The way it was explained to me is it depends on wether the front sight has a pedestal or not. There’s a slight difference between the two.
 
m1008 said:
The dlask barrels don’t fit well with the MCS forend because of the profile/thickness, I’ve experienced this with a few different dlask short barrels

Even the factory 870 barrel clamp has two versions. One with an X stamped on it and one without.

The way it was explained to me is it depends on wether the front sight has a pedestal or not. There’s a slight difference between the two.
Click to expand...
I’ve always heard of people referencing the X- never had any idea of what I meant! Thanks for sharing
 
You must log in or register to reply here.
Back
Top Bottom