Remington Model 10 2 Barrel set

Bill Bracher

Member
Rating - 100%
568   0   0
I have this shotgun for at least 10 years and never shot it. It is engraved and the barrels match the serial number of the frame. One is a trap barrel one is a skeet barrel. This piece has me lost on price? The only modification was that someone put on a rubber recoil pad. Any info would be great I would give it 75%to 85% finish its dates back to 1940 I think.
 
Need pictures, of course. These guns are considered much more valuable in the States than in Canada for some reason. I have bought an early Model 10 trap gun for 300.00 and a mint condition Model 29 (same as Model 10 only newer) for the same price. If I remember correctly the barrels have to be fitted to the gun so a matched set would probably bring a lot more.
:needPics:
 
Sadly it is worth what ever you can get for it in canada
Very small following for these as noted
The grade means everything here and are the barrels also engraved?? There were many grades all marked and a pic is everything here
Being basic engraved and assuming factory ( not special engraved or real high grade) , I would say it still has sweet wood and with the two barrels
If you can find that person you may squeeze $1000 out of it but 99.9% think it is worth 1/3 of that. State side 2 to 6 times that pending condition and grade
All the best
Does she look similar to this one by any chance

10G8ziD.jpg
 
Last edited:
I have a Remington Model 10 Grade F premier 2 barrel set with the factory leg of lamb case. It is very hard to put a value on these guns in Canada.I'm sure it would be valuable in the states.
 
Epps Sold a set about 5 years ago for 499$. Id say baring a high grade gun you are looking at 550$-650$. The average person has no use for it and the serious target shooter would be looking for something more durable and matching the modern target gun layout.

You need to find someone who hunts grouse and turkeys but wants to do it with a vintage pumpgun.
 
Does she look similar to this one by any chance

10G8ziD.jpg

I have one with what looks like the same engraving on receiver. Its got engraving on the barrel but I cant see if its 10a or 10whatever because its got a simmons rib on it. The forearm is the extendedd style as well as 'prince-of-wales' buttstock.
 
Back
Top Bottom