Remington Model 700™ VTR.

I have no experience with the VTR but I have an older Varmint synthetic in .223 that is a tack driver. I wouldnt sell it for anything. It has the HS precision stock with the aluminum bedding block and shoots 1/4 inch at 200 yds. I use Nosler 55 grn ballistic tips with imr 4198. Too bad we don't have gophers on the west coast. Kevin.
 
The VTR is a gimmick for the "tacticool" crowd. I'm actually embarassed to own the 700's that I do when I see this monstrosity.

Save yourself a lot of money and buy a SPS Varmint and paint the stock green if you happen to like the look.
 
I have no experience with the VTR but I have an older Varmint synthetic in .223 that is a tack driver. I wouldnt sell it for anything. It has the HS precision stock with the aluminum bedding block and shoots 1/4 inch at 200 yds. I use Nosler 55 grn ballistic tips with imr 4198. Too bad we don't have gophers on the west coast. Kevin.

You're kidding right? Isn't that 1/8 MOA on a production rifle? :eek:
 
bought the gun used and just took it apart the other day. It has been bedded and has a real nice trigger but that's what it did. I did it only once at 200 but have come close several other times and it will keep it inside that at 100 all day. It is a very boring rifle to shoot but it wins lots of local competitions for me. I liked it so much I bought the same thing in .308 and it was almost as good. It has since been rebarreled in 6BR. Now it shoots as well as the .223.
 
I have no experience with the VTR but I have an older Varmint synthetic in .223 that is a tack driver. I wouldnt sell it for anything. It has the HS precision stock with the aluminum bedding block and shoots 1/4 inch at 200 yds. I use Nosler 55 grn ballistic tips with imr 4198. Too bad we don't have gophers on the west coast. Kevin.

What you have is the biggest freak of nature in the factory firearms world. If it truly shoots that well - and if YOU can shoot that well - it is a one in a million gun in the hands of the right person.

...before I paid out any lost bets over its accuracy, would sure like to see those results repeated in person!;)
 
I have a VTR in .308. I like it. It is very nicely balanced for a coyote gun. Good for offhand shots. Lighter to pack than a target rifle. Most of these guys slag them because they are different.
 
I haven't been able to do it again at 200yds, but I can do it quite regularly at 100. It is a very special gun. I would not hesitate to buy another. I have had two in 6mm remington that were just as good. I know there are better brands out there but the ones that I have owned or own now have been very good guns. I don't like that triangular barrel though and also think it is just a marketing thing.
 
I have no experience with the VTR but I have an older Varmint synthetic in .223 that is a tack driver. I wouldnt sell it for anything. It has the HS precision stock with the aluminum bedding block and shoots 1/4 inch at 200 yds. I use Nosler 55 grn ballistic tips with imr 4198. Too bad we don't have gophers on the west coast. Kevin.

My .308 shoots .40 " at 100 yards. But on the internet....... it shoots .25" at 500 yards as long as I do my part of course ;) Thats with wind and on any day (expect the day when I'd be expected to prove it, naturally).

Sorry but unless your rifle is a super bench gun, you were shooting indoors at 200 yards with absolutely no wind and you just found a four leaf clover after telling the little Leuprochaun beside you that his name is in fact "Rumplestilskin" then I seriously call BS on your claim.

I'm not even entirey convinced that the .223 round is capable of that accuracy. If a .223 round was capable of that I would seriously doubt it would be from a 55 grain ballistic tip. A 70 grain Berger or other target grade boat tail with a high BC for .223 would still have me very (extremely) sceptical. That would have to be from a dedicated bench only gun with the best optics and a world class bench rest shooter (who no doubt would rather be shooting a .22BR rather than the .223 )

I wouldn't bother shooting gophers with that uber .223 you've got. Hell a rifle like that has no doubt taken it's fair share of Saskwatch. Let me guess you call it "Excalibur"?
 
Last edited:
Most people hang on to their best groups (I certainly do); it's a good bet he has done the same. Instead of jumping the gun and starting to get smarmy, let's offer him a chance to put a pic or two up.
 
Most people hang on to their best groups (I certainly do); it's a good bet he has done the same. Instead of jumping the gun and starting to get smarmy, let's offer him a chance to put a pic or two up.

In previous posts a ways back the group was half an inch at 200 yards. That was in two different posts. Now it's 1/4 inch. :rolleyes:

Still you believe he got .25 " at 200 yards with a stock Remington varmint rifle? :bsFlag:

Short of it being a 1 shot only "group", I just don't buy it.
 
Last edited:
I was looking at it cause it has a 1:9 twist while their other ones are all at 1:12, which is to slow for me.

I would have figured for a long range rifle in .223 you would want a 1:7 or a 1:8.

With that 1:9 69gr is about the heaviest you can shoot. If you are going out to 500-600 yards you'll want to shoot 77 or 80gr. Just my .02.
 
I would have figured for a long range rifle in .223 you would want a 1:7 or a 1:8.

With that 1:9 69gr is about the heaviest you can shoot. If you are going out to 500-600 yards you'll want to shoot 77 or 80gr. Just my .02.

My own rifle is a Tikka .223 with a 1:8 twist and I've had good success out to 600 yrds with American Eagle 55gr. and I know it will handle up to 80gr. I was just curious about this new model.
 
My own rifle is a Tikka .223 with a 1:8 twist and I've had good success out to 600 yrds with American Eagle 55gr. and I know it will handle up to 80gr. I was just curious about this new model.

Just letting you know that the 1:9 will limit your bullet selection. If you do pull the trigger on the purchase make sure you post some range results.
 
Back
Top Bottom