Remington Model 700 Sticky

[Leavenworth]

I see a few sticky’s for certain Firearms but for all the love of The Remington Model 700’s how come no sticky for them ?
Leavenworth

 

[NAA]

Remington 700 sticky

There you go.....

Here's my Rem 700 in 7mm-08 to kick this off....





----------
NAA.

 

[Leavenworth]

That was fast ! Whoever made this happen , Thank You !
Leavenworth

 

[Leavenworth]

Thanks for being the first to post NAA !
Leavenworth

 

[Grizzlypeg]

Here's my Rem 700 custom. This is it with a heavy 223 barrel and bolt, I also have 2 308 barrels and a bolt to match them. As its an AICS chassis, I can just switch magazines.

 

[Buckmastr]

Great rifles. Not much to complain about.

 

[guntech]

Action trued and sear timed for smoothest operation. Kwik Klip conversion, 2-7x33 Leupold with Firedot reticle in Leupold rings. Decelerator recoil pad. 2 pound crisp and safe Remington trigger with the old style "Tombstone' safety lever. It's a .243 Remington heavy barrel I turned down and set back with a shorter throat. Shoots factory 100 Hornady ammo between 1/2 and 3/4 inch groups. The top metal has been Cerakoted, the action bedded and the barrel floated.

 

[Leavenworth]

You fellas in Alberta sure have lots of different critters to hunt and doing it with Remington 700 !
Leavenworth

Great rifles. Not much to complain about.

 

[Leavenworth]

Oh no not a Black rifle, what would the Antis say LOL !
Leavenworth

Here's my Rem 700 custom. This is it with a heavy 223 barrel and bolt, I also have 2Very 308 barrels and a bolt to match them. As its an AICS chassis, I can just switch magazines.

 

[Leavenworth]

Nice dark wood on that one Guntech !
Leavenworth

Action trued and sear timed for smoothest operation. Kwik Klip conversion, 2-7x33 Leupold with Firedot reticle in Leupold rings. Decelerator recoil pad. 2 pound crisp and safe Remington trigger with the old style "Tombstone' safety lever. It's a .243 Remington heavy barrel I turned down and set back with a shorter throat. Shoots factory 100 Hornady ammo between 1/2 and 3/4 inch groups. The top metal has been Cerakoted, the action bedded and the barrel floated.

 

[Rembo]

Nice 700 Dennis, I like that one.
I looked on my imgur account for 700 pics and found these.
1993 action with old style HS stock, 9" twist Brux at 26" chambered in the plain old 243 Win.
AI style bottom metal, Timey trigger, Gretan firing pin assemby and Trijicon 5-20 x 50.

 

[Buckmastr]

Heavy barrel Model 700’s are consistently the most accurate factory rifles I have shot.

 

[leeelmer]

This is my custom 358 Norma Magnum one of my favourite rifles.

 

[The Outsider]

Here's my 1963 Remington 700 in 30'06 with the factory 20" barrel that was only available for a couple of years.



Below is my 1981 700 BDL, also in 30'06.

Both guns are in excellent original factory condition and very accurate...

 

[ShrtRnd]

Even though I’m not much of a target/bench-shooter that’s a nice looking rig sir!

Nice 700 Dennis, I like that one.
I looked on my imgur account for 700 pics and found these.
1993 action with old style HS stock, 9" twist Brux at 26" chambered in the plain old 243 Win.
AI style bottom metal, Timey trigger, Gretan firing pin assemby and Trijicon 5-20 x 50.

1969 .473 short action. Been here for a couple years, not sure what it will become.

 

[Buckmastr]

 

[Buckmastr]

 

[Rembo]

that looks like a Custom KS or an ADL/FS with the Brown Precision or McMillan stock.
I've had a few of those through here....leo ended up with the last two...

 

[FatCatsDad]

Where could a person order a 223 short action quick clip and extra magazine ?

 

[remington jim]

###