Removing copper?
- Thread starter schick
- Start date
Claven2 said:
www.russellsports.com
Hunting and Shooting 2006 catalog- Page 178 - Item # 241095 $19.99
I found that with some of my rifles they shoot better with a little fouling in the barrel but if you want to get it all out check out this site and make sure you have a look at the home made electric foul out. I built the simple one for about $15 and gave it a try.
http://www.frfrogspad.com/homemade.htm
If you want the fastest, simplest, and cheapest way I found to get the copper out without running a single patch, this is the way. Just make sure you don't leave the solution in longer that 15 min at a time. This will get you down to the real problem (the carbon fouling) which sad to say is where the soaking and scrubing begins.
Everyone has an opinion and I am no expert, but for all the advise I have read on this thread about copper fouling no one has said anything bad about the electric foul out (yet!!!), so for the price why not give it a try.
If anyone wants details on the materials I used and where to find them, please PM me.
Dave
http://www.frfrogspad.com/homemade.htm
If you want the fastest, simplest, and cheapest way I found to get the copper out without running a single patch, this is the way. Just make sure you don't leave the solution in longer that 15 min at a time. This will get you down to the real problem (the carbon fouling) which sad to say is where the soaking and scrubing begins.
Everyone has an opinion and I am no expert, but for all the advise I have read on this thread about copper fouling no one has said anything bad about the electric foul out (yet!!!), so for the price why not give it a try.
If anyone wants details on the materials I used and where to find them, please PM me.
Dave
I found that with some of my rifles they shoot better with a little fouling in the barrel but if you want to get it all out check out this site and make sure you have a look at the home made electric foul out. I built the simple one for about $15 and gave it a try.
http://www.frfrogspad.com/homemade.htm
If you want the fastest, simplest, and cheapest way I found to get the copper out without running a single patch, this is the way. Just make sure you don't leave the solution in longer that 15 min at a time. This will get you down to the real problem (the carbon fouling) which sad to say is where the soaking and scrubing begins.
Everyone has an opinion and I am no expert, but for all the advise I have read on this thread about copper fouling no one has said anything bad about the electric foul out (yet!!!), so for the price why not give it a try.
If anyone wants details on the materials I used and where to find them, please PM me.
Dave
http://www.frfrogspad.com/homemade.htm
If you want the fastest, simplest, and cheapest way I found to get the copper out without running a single patch, this is the way. Just make sure you don't leave the solution in longer that 15 min at a time. This will get you down to the real problem (the carbon fouling) which sad to say is where the soaking and scrubing begins.
Everyone has an opinion and I am no expert, but for all the advise I have read on this thread about copper fouling no one has said anything bad about the electric foul out (yet!!!), so for the price why not give it a try.
If anyone wants details on the materials I used and where to find them, please PM me.
Dave
I found that with some of my rifles they shoot better with a little fouling in the barrel but if you want to get it all out check out this site and make sure you have a look at the home made electric foul out. I built the simple one for about $15 and gave it a try.
http://www.frfrogspad.com/homemade.htm
If you want the fastest, simplest, and cheapest way I found to get the copper out without running a single patch, this is the way. Just make sure you don't leave the solution in longer that 15 min at a time. This will get you down to the real problem (the carbon fouling) which sad to say is where the soaking and scrubing begins.
Everyone has an opinion and I am no expert, but for all the advise I have read on this thread about copper fouling no one has said anything bad about the electric foul out (yet!!!), so for the price why not give it a try.
If anyone wants details on the materials I used and where to find them, please PM me.
Dave
http://www.frfrogspad.com/homemade.htm
If you want the fastest, simplest, and cheapest way I found to get the copper out without running a single patch, this is the way. Just make sure you don't leave the solution in longer that 15 min at a time. This will get you down to the real problem (the carbon fouling) which sad to say is where the soaking and scrubing begins.
Everyone has an opinion and I am no expert, but for all the advise I have read on this thread about copper fouling no one has said anything bad about the electric foul out (yet!!!), so for the price why not give it a try.
If anyone wants details on the materials I used and where to find them, please PM me.
Dave
I found that with some of my rifles they shoot better with a little fouling in the barrel but if you want to get it all out check out this site and make sure you have a look at the home made electric foul out. I built the simple one for about $15 and gave it a try.
http://www.frfrogspad.com/homemade.htm
If you want the fastest simplest and cheapest way I found to get the copper out without running a single patch, this is the way. Just make sure you don't leave the solution in longer that 15 min at a time. This will get you down to the real problem (the carbon fouling) which sad to say is where the soaking and scrubing begins.
Everyone has an opinion and I am no expert, but for all the advise I have read on this thread about copper fouling no one has said anything bad about the electric foul out (yet!!!), so for the price why not give it a try.
If anyone wants details on the materials I used and where to find them, please PM me.
Dave
http://www.frfrogspad.com/homemade.htm
If you want the fastest simplest and cheapest way I found to get the copper out without running a single patch, this is the way. Just make sure you don't leave the solution in longer that 15 min at a time. This will get you down to the real problem (the carbon fouling) which sad to say is where the soaking and scrubing begins.
Everyone has an opinion and I am no expert, but for all the advise I have read on this thread about copper fouling no one has said anything bad about the electric foul out (yet!!!), so for the price why not give it a try.
If anyone wants details on the materials I used and where to find them, please PM me.
Dave
I found that with some of my rifles they shoot better with a little fouling in the barrel but if you want to get it all out check out this site and make sure you have a look at the home made electric foul out. I built the simple one for about $15 and gave it a try. It worked Great.
http://www.frfrogspad.com/homemade.htm
http://www.frfrogspad.com/homemade.htm
