Removing the bolt..

[SMLE 303]

Afternoon all,
After going though countless rounds of CB shorts out of my Cooey Model 60, I decided to give it a good cleaning. Now, normally I prefer to clean from the breach, but I have no clue how to remove the bolt. I cleaned it anyhow(from the muzzle), but I just can't stop wondering how to remove the bolt! knowing you guys, I'm sure some one will give me a good answer. Thanks in advance

 

[Grouse Man]

Pull the trigger as you slide the bolt out the rear.

 

[SMLE 303]

Ok, thanks. I'll have to do that later tonight. Thanks for the quick reply Grouse Man!

 

[Winnipeg Toymaker]

For the 60 and 600 models....remove the stock and loosen the stud with the hex nut until the action comes apart. The bolt is integral to the magazine.

 

[Winchester-1897]

For the 60 and 600 models....remove the stock and loosen the stud with the hex nut until the action comes apart. The bolt is integral to the magazine.

Exactly,and how many times does this question come up in year. It should be part of the FAQ.

 

[Winnipeg Toymaker]

Guess no one knows how to read previous threads. Or knows how to use the search....

 

[SMLE 303]

when the search works and my dial up agrees...

 

[cyclone]

For the 60 and 600 models....remove the stock and loosen the stud with the hex nut until the action comes apart. The bolt is integral to the magazine.

Wish it was more like the 39's bolt...