Rimfire Pics...Show em off!!!

[agent_mango]

Thanks for the info!

I basically just want a mount that allows me to see out to 25 yards if my Burris Speed-Dot should fail.

I can't seem to find anyplace that sells B-Square mounts up here in Canada. At least a UTG mount gives me another option if I can find one.

Cheers!

A 10/22 with a Speed-Dot should be lots of fun! I think semi-auto 22 rifle + red dot is a great combo.

As long as you don't mind taking the optic off (like we've both mentioned), I'd recommend the UTG rail. I can't find the B-Square mount on ebay, unfortunately, but I will PM you the link with where I bought the UTG rail on there.

 

[Godti]

Can you get mounts for the scope that raise it up so you can also use the metal sights?

 

[elimsprint]

Can you get mounts for the scope that raise it up so you can also use the metal sights?

You can but then the scope is so high that you can't get a proper sight picture or cheek weld and you lose a lot of accuracy so it is kind of self defeating IMHO.
Kim

 

[MapleSugar]

A 10/22 with a Speed-Dot should be lots of fun! I think semi-auto 22 rifle + red dot is a great combo.

As long as you don't mind taking the optic off (like we've both mentioned), I'd recommend the UTG rail. I can't find the B-Square mount on ebay, unfortunately, but I will PM you the link with where I bought the UTG rail on there.

Thank you!

 

[Alberta Bigbore]

my Grouse Buster.......


blue/grey laminate Ruger 10/22, With a 4-reticule Bushnell Trophy red dot with sunshade Crosshair reticule shown in pics.

Just a hoot to shoot!!!!!

 

[cbabes]

Here's my Archangel finally complete for the mall ninja in everyone.

-Dlask barrel
-Yankee Hill muzzle brake
-Fake Aimpoint/real LaRue Mount
-Midwest Industries BUIS cowitnessed
-Tapco stubby forend grip

 

[surfer365]

Thanks to Clay for this one

 

[incorrigible]

The starting point...

Including the new Dlask receiver with a custom serial number for gopher hunting

all the parts together...

Gunsmither Supported V-block w/ a Hexagonal Take down bolt replacement and the instructions

Before bedding I removed some of the stock material and installed a threaded bearing plate into an epoxy/glass bedded Boyds Tacticool Stock

Dlask Reciever and Fluted 20" Fluted/Threaded Bull barrel
Bedded Boyds Tacticool Stock
Gunsmither Supported V-block w/ a Hexagonal Take down
Embedded and reinforced threaded takedown bolt
Volquartzen HP Action Kit for a 2 lb pull
Volquartzen Extractor, Extended Mag Release, Buffer
Burris Signature Rings w/ Bushnell 24x50 scope
Harris bi-pod (tilt and pan)

 

[pat84]

Dlask 22

Here is my Dlask build:

Dlask receiver
Promag Archangel Deluxe Target stock
Shilen 16" barrel
Hornet 2 stage trigger with red bang switch
Kidd Bolt, guide rod and cocking handle
Vortex scope.
Haven't shot it yet, just got the barrel after waiting 5 months for it. Hoping for decent results. What do you think?

Taylor

 

[cbabes]

Here is my Dlask build:

Dlask receiver
Promag Archangel Deluxe Target stock
Shilen 16" barrel
Hornet 2 stage trigger with red bang switch
Kidd Bolt, guide rod and cocking handle
Vortex scope.
Haven't shot it yet, just got the barrel after waiting 5 months for it. Hoping for decent results. What do you think?

Taylor

Beautiful. Should be a Tac driver.

 

[Armament]

My new 10/22 red-dot:

Stainless 10/22 with black receiver
Hogue Stock
Aimpoint T1 in ADM Low Mount
UTG Rail
VQ Buffer, Extractor, Hammer, Takedown Screw, Auto Bolt Release

Not a bad little rig but those black blotches on the receiver make it look like crap

 

[Skinny 1950]

 

[mauser]

Savage Single Shot 101

SAVAGE MODEL 101, .22rf S-L-LR, single-shot. Overall barrel length 5 1/2", weight 20 ozs., length overall 9". Manufactured between 1960 and 1968. Unknown quantity produced.

My gun buddies have for a couple of years been sending me leads to various 101s being offered and for some reason I kept putting off actively going after one for my single-shot collection. On Sept. 18th I learned why I had waited.

An online auction out of Georgia was offered this little gem, complete with its original numbered box and Instruction Sheet. I was fortunate enough to win it. Overall everything is in near new condition. Two TINY, almost invisible scratches on the gun are its only flaws.

I'm really happy to add it to the collection.

Best regards ~ ~ ~ mauser

I used to be indecisive. Now I'm not sure.

 

[pittboomer]

verrrry coool

 

[greyman441]

Just got this one today, will be a while before it arrives but I am VERY stoked.
Very early Stevens Visible Loader, first one I've seen with case colors still showing, it is a beauty!

Here's my other one from the weekend. Someone should tell this squirrel those pine cones aren't going to open up for a couple years unless he burns them. Quite the stash.

I have one of these .22 pumps the one with the round barrel. Mine is in worst shape than yours. I have some pitting on mine. Great looking gun though.

 

[ampegor]

not as fancy as some but lots of fun

savage mk11bv in boyds tacticool stock
bushnell banner 6-18x50ao
blued bolt for the "tactical" look
all in less than 550$

 

[911alertme]

Just loving its out-of-the-box accuracy! I also picked-up a 10 round magazine for it.

I was not aware 10 round magazines were available. Care to share your source?

 

[lone-wolf]

"http://www.savagearms.com/customerservice/contact/"
You can order the magazines from savage, phone number(parts&service) is listed on the webpage

 

[Nine]

Ruger 22/45 "Short Hunter" (KP45HMKIII)

 

[Nine]