Rimfire PRS

[SJAR]

Let's see some rimfire prs rigs.

Mine is a CZ 453 American with. DIP 25 Moa base and Burris XTR rings with another 25 Moa added. Leupold VX-2 4-12 CDS with a Fine Duplex. Harris bipod because I don't have the heart to drill holes for a pic rail.

After zeroing at 25yd I took it to 290 yd with 48moa dialed. Then out to 360 yd (65moa) and eventually 400 yd. I run out of travel at about 375 yd so I just held the rest at 400 but for a cheaper scope I'm happy with that.

I was really looking forward to see how well this scope was going to dial from top to bottom and back. It didn't disappoint. And I dialed back down to zero and it was bang on.

I'm using SK Standard + and getting 1040fps.

So far Applied Ballistics has been bang on with a G1 BC of .135.

I'll be trying smaller steel next time out but the wind was pretty strong on my initial scope test.

 

[grauhanen]

I'll be trying smaller steel next time out but the wind was pretty strong on my initial scope test.

What size steel is the piece shown above? What was the hit rate at the various distances you shot?

 

[SJAR]

What size steel is the piece shown above? What was the hit rate at the various distances you shot?

It is a full size IPSC Classic which measures 18" wide x 22" tall.

I would say the hit rate was 80-90% with misses due to wind at all distances but 400 where the holds became difficult with the duplex reticle.

 

[sk8snwmx]

I use Center-X in my cheap FV-SR and use 0.125 bc and its tracked out to 330yards with 16.5mil of dialing off a 50 yard zero.

If you happen to have facebook, I uploaded all the pictures I took at the CRPS Battle hill series... it was an AWESOME event! Shooting out the windows of vans, and big trucks, material handlers, old tractors, the 'tree house' 45 degrees down into the ravine and the grassy knoll!!! Thanks Ron!

https://www.facebook.com/tyler.deer.7/media_set?set=a.10157572513857947&type=3

click my facebook page 'albums' and look through as I have volunteered my photography at all the EESA events in the last 2 years also.
Rick is a champ!

 

[grauhanen]

It is a full size IPSC Classic which measures 18" wide x 22" tall.

I would say the hit rate was 80-90% with misses due to wind at all distances but 400 where the holds became difficult with the duplex reticle.

Thank you. A hit rate of at least 8 out of 10 at 360 yards sounds incredible.

 

[SJAR]

Thank you. A hit rate of at least 8 out of 10 at 360 yards sounds incredible.

I was surprised as well. You can see the hits pretty centered for vertical spread on the steel. We had two shooters and were both having a blast.

 

[fljp2002]

CZ 455, MDT LSS RF Chassis, DIP 25 MOA rail, Cabelas Covenant 4 6-24. Yo Dave trigger kit. Scope needs changing to 4-16 so I can get beyond 300 metres with elevation.

832C3579-35F8-4137-AE4C-6308A05B22F5 by fljp, on Flickr

 

[SJAR]

CZ 455, MDT LSS RF Chassis, DIP 25 MOA rail, Cabelas Covenant 4 6-24. Yo Dave trigger kit. Scope needs changing to 4-16 so I can get beyond 300 metres with elevation.

832C3579-35F8-4137-AE4C-6308A05B22F5 by fljp, on Flickr

Very nice