Rings for CZ 452 11mm dovetail

[Jabol]

Does anyone know who carries rings for CZ 452 11mm dovetail base?

 

[buffdog]

.
Anyone who carries MILLET sights can help you. The CZ 452 uses Number 1070-4212 mounts. These mounts will also fit the Zastava Z5 / Remington Model 5 and other rifles with a European type 11 mm dovetail. Also, many Air Rifle scope bases will fit.
.

 

[jperos]

I have several CZ rifle and I use Warne rings on all of them. Order from Brownell's.

 

[*lawrence]

I ordered mine directly from CZ...

 

[dugasgunner]

I ordered mine directly from CZ...

CZ USA or CZ EUROPE?

 

[Jabol]

CZ USA or CZ EUROPE?

good question, is it legal to export firearm parts from US? Perhaps CZ USA has export license, worth checking out. Thanks everyone for the suggestions.

 

[hometownhero]

Burris rimfire as well. Have those on my cz and had them on 2 zastava z5

 

[Jabol]

Burris rimfire as well. Have those on my cz and had them on 2 zastava z5

you mean the ones in top right corner would work?

h ttp://www.lebaron.ca/pdf_files_fall12/burris_rings_bases.pdf

 

[*lawrence]

CZ USA or CZ EUROPE?

CZ Europe, they came whistling through via FedEx. Described as metal clamps and the magazines as metal boxes.

 

[horseman2]

I have Leupold 13mm ring mounts on my CZ452 American and they fit very nicely.
I really liked the look of the CZ rings as described by lawrence.

 

[hometownhero]

you mean the ones in top right corner would work?

h ttp://www.lebaron.ca/pdf_files_fall12/burris_rings_bases.pdf

Yes. I have them on my cz and have put them on 3 22's with 11mm dovetail. the clamp that grabs the grove can be flipped one side is 3/8 and the other is 11mm. I used the side that fit better.

 

[kamlooky]

CZ Europe, they came whistling through via FedEx. Described as metal clamps and the magazines as metal boxes.

How many kerch$ngs to your door?

 

[Jabol]

Yes. I have them on my cz and have put them on 3 22's with 11mm dovetail. the clamp that grabs the grove can be flipped one side is 3/8 and the other is 11mm. I used the side that fit better.

Thanks, that simplifies things for me a bit. Do you have medium or high rings? I will put a 2-7X33 Leupy on the CZ and hopefully it will clear the rear iron sight with a medium hight.

 

[horseman2]

Thanks, that simplifies things for me a bit. Do you have medium or high rings? I will put a 2-7X33 Leupy on the CZ and hopefully it will clear the rear iron sight with a medium hight.

The Medium rings would not allow the bolt to function with a 3 - 9 Bushnell due to the diameter of the power ring using the 13 mm Leupold Ring mounts.
The Redfield Rifleman works fine though, especially after the parallax was adjusted to 75 yards.

 

[analemma]

The Medium rings would not allow the bolt to function with a 3 - 9 Bushnell due to the diameter of the power ring using the 13 mm Leupold Ring mounts.
The Redfield Rifleman works fine though, especially after the parallax was adjusted to 75 yards.

Did you adjust the parallax yourself or send it to a service depot?

 

[dimeN]

there is also Talley rings ... get the highest you can to avoid the bolt hitting the scope
millet are garbage !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

[hometownhero]

Thanks, that simplifies things for me a bit. Do you have medium or high rings? I will put a 2-7X33 Leupy on the CZ and hopefully it will clear the rear iron sight with a medium hight.

High. Mediums are to low for the bolt to clear the scope bell

 

[.22LRGUY]

I used to have a 452 Varmint in .17HMR. I used BKL-261 and had a Bushnell 3200 Elite, 4-12x if memory serves. Everything looked good, was solid, everything cleared.

 

[JADER]

I use BKL 257 standard on all four of my CZ452's

 

[*lawrence]

How many kerch$ngs to your door?

Sorry, I can't recall...nice rings though, very well made.