Rossi 62 rough chamber

[bat119]

Have. A Rossi 62 with a rough chamber won’t eject without prying with a pocket knife
Tred cleaning to no avail if I push a fired case in it comes out with scratches on the case very sticky I’m a long way from a gunsmith so looking for some DYI fix

 

[Lodi]

"0000" steel wool on a fuzz stick, lots of oil, not too much speed on the drill motor. Try to stay out of the rifling.

 

[Thunderhog]

I’ve had success with a rifle bore brush, gun oil, an old pistol bore cleaning rod, and in a drill at moderate to high speeds.
A 22 LR chamber and a 243” sized brush and polish her up.
Like Lodi stated, not too deep as to hit the rifling…

 

[pjs]

Check and see if there is a burr at the mouth of the chamber from dry firing. If so it can be ironed out easily. The picture is not clear enough for me to see.

 

[bat119]

Thank you for the suggestions I’ll try tonight and check for that burr really good suggestion