Ruger 10/22 Help

J

jasonmorash1

New member
EE Expired
Rating - 100%
2   0   0
Im having an issue with the ol girl. A few years back i stripped it down to the last spring, including the trigger assem. and gave it a cleaning and lube. However, once it was back together it would only fire a single round and would need to be charged again. Weird thing was that when it got charged a unfired round would come out. So it was cycling properly on that end. However, there would be no click (hammer not fully back and locking when cycling maybe?). So i took the trigger assem. apart again and put it back together correctly. Worked great fired about a couple grand out of her.

But now its acting up again. I cleaned it (never touched the trigger assem. this time). Fired 20 rounds nice, and then started to act up. Same thing fire, then nothing. and a fresh round coming out once cocked, and then fire ect. I cant figger it out.

Looking for some suggestions/advice/recommendations

Cheers
 
If it is not going click I would guess the bolt is not going back far enough to fully #### the hammer. I would put some lube on the action spring and bolt/reciever and try some more. Also take the trigger group out and see if the hammer cocks OK by hand, just don't fire the trigger group unless you are restraining the hammer with your finger.
Kim
 
One thing that I was guilty of once was accidently swaping the disconnector spring with the plunger spring from behind the trigger, it would not let the trigger reset. I realized what I did and corrected it. If it is not something like that then I would have a proffesional look at it cause it sounds like something won't let the sear reset and hook the hammer. Just my 2 cents.
 
You must log in or register to reply here.
Back
Top Bottom