ruger 10/22 hogue and quad rail build!

red_noir

red_noir

Regular
Rating - 100%
17   0   0
Location
southern ontario
hey guys ! heres my new .22 Ive seen a few rugers with utg quad rails and fitted with hogue stocks so I thought Id replicate the same thing here !

Here's a list of what I've done so far

1 ruger 10/22
2 16 inch fluted blued Green mountain barrel from Fab
3 tuffer buffer
4 superiors concepts bolt handle
5 magpul ladder rail covers
6 knights armaments ribbed rail covers
7 mil dot scope
8 butler creek steel lip mags and magpuls

9430_171782891577_503851577_4236111_2251333_n.jpg


9430_171782921577_503851577_4236112_5183781_n.jpg


9430_171782861577_503851577_4236110_2595892_n.jpg



still waiting on my black over molded hogue stock and pantac 3 point sling !
 
Last edited:
9430_172971826577_503851577_4243379_5010117_n.jpg


9430_172971831577_503851577_4243380_2356451_n.jpg


as u can see in the two images the fwd portion of the rail clamps around your stock. In the case of a Hogue some modification is necessary. the aft portion of the rail extends back to the 4 taped scope mount screw locations !

hope this clears things up, as its sitting now its missing a stock that I hope to receive in the next week ! :)

when its complete Im hoping to have a finished product similar to this...............

9430_171782926577_503851577_4236113_2053752_n.jpg
 
Last edited:
Ok I finished it tonight ! the hogue stock came in yesterday ! and Im really impressed with it !! when I first fitted the action into the stock I was amazed how snugly it fit. With the stock ruger wood carbine stock, u could feel the receiver moving around ever so slightly. Also noted as a difference between the two stocks is in the magazine area the hogue is much better and seems to take up the space between the sides of the mags and stock so they don't rock from side to side as they did in the wood stock. ( mags used were butler creek 25rnd steel lips)

ok onto the build.

Tonight I had to cut back about two inches of rubber stock material and file away some nylon to make the shoulder needed to install the lower portion of the utg quad rail.
This was kinda scary ! but all worked out once you have removed the rubber over mold you are left with the nylon frame of the stock this was shaped with a razor file(Rasp). All in all about 30 min of work ! much easier than I expected !!

now I'm off to bed tomorrow pics !!
 
You must log in or register to reply here.
Back
Top Bottom