Ruger 10/22 Tactical

[bfiles]

cant find a stock 1022 18.5" barrel and threaded

Yes that's why samson makes this...

 

[chillyrabbit]

The gsg16 isnt a muzzle attachment. The barrel is there the whole length. The short one require stock pinning, iirc.

Still, i would rather my vtr over the 10/22 tac builds. The sr22 however is a strong contender for my tac 22 needs.

It was the GSG 15 SD (SCAR clone special edition that had a fully "suppressed" barrel shroud instead of the regular barrel). The notice was that the manufacturer used a shorter barrel/shroud than the Standard edition that resulted in accidental restricted SCAR-15's being sold. The notice said that replacement of the shroud with a longer one would keep the rifles Non-restricted.

RCMP is inconsistent of how firearms get measured.

 

[brownbear53]

Exactly what I did. Even got the best shield and just waiting on the rail/iron sights now.



Brakes don't count to OAL.

Yes they do, OAL length in firing condition is end to end(not including accessories like lights etc)
Assuming the brake is torqued on and cannot be removed without tools.

Brakes don't count for barrel length however.

 

[maifire]

Agreed. The lab is absolutely brutal. I understood that you were talking about the gsg16. Tmk, this was never the case.

 

[IRUNGUNS]

That is not correct, brakes and stock pads do count towards AOL. We went through that when we had gotten the TROY PAR approved for Canada.

We have written correspondence that states that.


The IRUNGUNS Team

Exactly what I did. Even got the best shield and just waiting on the rail/iron sights now.



Brakes don't count to OAL.

 

[Max Owner]

I Run Guns, can you get some of these?

 

[IRUNGUNS]

Hello.

Are you guys able to get one of these......

https://ruger.com/products/1022Tactical/specSheets/31185.html

We now have the stock for the 10/22 in black. Here is the link https://www.irunguns.com/product/new-product-88-61

 

[Max Owner]

Thank you for the reply.

 

[mastermind]

We now have the stock for the 10/22 in black. Here is the link https://www.irunguns.com/product/new-product-88-61

Can you get this in stainless?

 

[Petrock]

how did you build it?

Assembled is the correct word. You can buy parts all over the place and make your 10/22 into anything. They do Thompson sub machine gun, MG 42 etc lol.

 

[IRUNGUNS]

Can you get this in stainless?

Here is a link t the 10/22 Tactical. https://www.irunguns.com/product/ru...i-6-position-stock-25-rounds-1-magazine-31212

 

[mastermind]

Here is a link t the 10/22 Tactical. https://www.irunguns.com/product/ru...i-6-position-stock-25-rounds-1-magazine-31212

We’re looking for the factory supplied 10/22 with Samson stock, rail, sights, etc.

Ruger model #31185

https://ruger.com/products/1022Tactical/specSheets/31185.html

 

[BKnill1]

he's talking about the VZ61 in .22lr which is classified as a restricted rifle due to barrel length

No, the 22lr version is restricted because it folds to be under 26" OAL. If you pin the stock it can be classed as nr