Fits Smith & Wesson M&P Pistols in 9mm and 40S&W cal. with medium and small size backstrap. (need to remove bottom edge of large backstrap for proper fit; does not fit M&P Compact).**
'EasyFit MagWell' for Smith & Wesson M&P 9mm & 40S&W pistols’
**Fits like a glove and good for daily carry.
**Increases reloading speed by 50% with no additional training
Everyone knows an enlarged magazine well on a semi-auto pistol can speed up one's reloading speed that might determine whether one wins or loses in a competition, or life or death in a gunfight.
This latest design made use of the high-pressure plastic injection mould technology (same as the Glock pistol; Springfield XD pistol; Walther P99; S&W M&P etc) to minimize human error. This way, each unit is produced exactly the same as per specification.
Features:
Improves reloading speed by 50%
Increases magazine well opening by 49%
Protects magazine well of firearm
Specification:
Fits Smith & Wesson M&P Pistols in 9mm and 40S&W cal. with medium and small size backstrap. (need to remove bottom edge of large backstrap for proper fit; does not fit M&P Compact).
Made of polymer (nylon) material, durable and long lasting
Weight - 0.27 OZ (7.7 gram),
original frame tool - 0.16 OZ (4.6 gram)
weight added - 0.11 OZ (3.1 gram)
Maximum width - 1.47¨ (37.3mm)
Inside width - 1.42¨(36.1mm)
Original inside width of S&W M&P magwell -0.95¨ (24.1mm)
Installation:
1. Make sure the firearm is unloaded.
2. Remove the magazine from the gun handle.
3. Rotate the 'Frame Tool' 1/4 turn (90 degree) and pull it out (it is very tight fit) - picture A.
4. Insert the 'Frame Insert' to replace the 'Frame Tool' - picture B.
5. Place the U shape magwell onto the 'Frame Insert' and screw tight - picture C.
6. Insert an empty magazine for fit testing.
7. Live fire at an approved area to get use with this new fixture.
Note: If you are not comfortable with the installation, please have a qualified gunsmith to do the job for you
