Savage 10 FCP HS in .308 Help (New Pictures)

[Gymbuff]

Thanks for the advise i am going to get it all set up first and take it to the range and see how it shoots, then probably will take it in to Alberta tactical rifle to get it pillar bedded!

Had the exact gun for a bit. Bed the action and your good to go. A brake would be stupid since it's only 308 and already a heavier gun.

 

[GunBoy]

Nice Rifles, I got the same one except it with Mcmillan stock, very nice and accurate, did put on muzzle break, not the prettiest, but you can sure see bullet hitting at 500meter...

 

[Gymbuff]

I completely forgot i will be loading my own rounds with the following SPECS
Any input on how many grains# from ppl with the same rifle???? i will be testing loads but would like some input for what has worked!

168 Sierra Match king bullets
Reloader 15 powder
CCI 200 Match Primers
Remington Brass

 

[mightyhunter]

Shoot it first before u getting it bedded. I don't think Jerry meant getting the brake put on to reduce recoil. I have brakes on 90% of my rifles so I can spot hits out at longer ranges.
My Savage 10FCP shoots under half moa with 44gr Varget under 168gr Nosler match.

 

[mikeelliot]

Does the HS stock not have pillars already in it?

 

[mightyhunter]

It has the Alum bedding block. No need to install pillars imo.

 

[Gymbuff]

yah it does have the alum bedding block, ill see how it shoots before i do anything!

 

[Ruthless]

I'll vouch for Jerry on the bedding job. Very good job,at a very good price!!

Me too, very good job.........very good results