Savage barrel question

rockready69

Member
Rating - 100%
58   0   0
Location
DC B.C.
Ok so I have a CIL 950C in 270win so pretty much a savage 111 i was thinking of replacing the barrel with another savage barrel in 300 win mag can I use my existing bolt or do I need to find a different bolt ?
Also looking at ordering a Boyd’s stock for it
 
I cannot remember who gave me this info, my apologies for not giving you credit. My understanding is that as long as the bolt faces are the same measurement you are good to go. So according to this info, no you cannot use the same bolt. There are much smarter people on here that will correct me if I am wrong.

Bolt Face and Case Length Dimensions

________________________________________
SMALL BORES
Caliber Case head (inches) Length (inches)
17 Rem .378" 2.17"
17Mach4 .378" 1.77"
204 Ruger .378" 2.26"
22 RemJet .439" 1.66"
22 Hornet .35" 1.8"
22 KHornet .35" 1.75"
22Spitfire .356" 1.65"
218Bee .408" 1.63"
218Mashburn .408" 1.63"
221Fireball .378" 1.84"
222Rem .378" 2.2"
222RemMag .378" 2.33"
223Rem .378" 2.3"
223RemAI .378" 2.3"
220Russian .441" 2.07"
22PPC .44" 2.07"
219Zipper .506" 2.4"
22BR .473" 2"
225Win. 473" 2.43"
224WeatherbyMag .43" 2.38"
22-250Rem .472" 2.35"
220Swift .473" 2.7"
224Clark .473" 3.08"
22CheetahMkI .473" 2.5"
223WSSM .535" 2.36"
22SavHiPower .492" 2.51"
6mm-223Rem .378" 2.26"
6mmPPC .441" 2.19"
6mmBR .473" 2.2"
6mmTCU .378" 2.5"
6mm-284Win .473" (rebated) 2.83"
243Win .473" 2.65"
6mmRem .473" 2.83"
240WbyMag .473" 3.08"
6.17Spitfire .53" 2.8"
243WSSM .535" 2.36"
240Apex (BeltedNE) .475" 3.21"
256WinMag .44" 1.78"
25-21Stevens .376" 2.3"
25-25Stevens .376" 2.63"
25Rem .421" 2.53"
250Sav .472" 2.4"
257Roberts .467" 2.99"
25-'06Rem .473" 3.25"
25-284Win .473" (rebated) 2.93"
257WbyMag .53" 3.3"
6.3Scramjet .53" 3.58"
6.5Japanese .466" 2.85"
6.5Carcano .449" 2.94"
6.5x54Mann-Schoen .453" 2.99"
6.5mm-257Bob .467" 2.75"
260Rem .473" 2.84"
6.5x55Swede .476" 3.03"
6.5mm-284Win .5" 2.95"
6.71Phantom .53" 2.8"
6.5mm-'06A-Square .473" 3.2"
6.5RemMag .532" 3.05"
264WinMag .532" 3.35"
270Win 473" 3.35
270WSM .535" 2.86"
270WbyMag .53" 3.28"
7x33Sako .394" 1.73"
7mmTCU (7-223) .378" 2.68"
7mmBR .473" 2.33"
7-30Waters .506" 2.55"
7mm-08Rem .473" 2.8"
7x57 .473" 3.02"
284Win .473"(rebated) 2.95"
7x64Brenneke .473" 3.3"
280Rem .473" 3.33"
7.21Tomahawk .577" 2.8"
7mmSAUM .534" 2.84"
7mmWSM .535" 2.86"
7mmRemMag .532" 3.29"
7mmWbyMag .53" 3.26"
7mmSTW .532" 3.6"
7mm-300WbyMag .532" 3.72"
7mmRUM .534" 3.6"
7.21Firebird .577" 3.6"
7mmDakota .545" 3.33"
28-30Stevens .412" 2.82"
7mmH&H .532" 3.22"
7mmRigby .528" 3.25"
300Sherwood .37" 2.2"
7.35Carcano .449" 2.9"
300Whisper .378" 2.26"
303Sav .503" 2.52"
300Sav .473" 2.6"
308Win .473" 2.8"
7.5x54MAS .482" 2.99"
7.5Schmidt-Rubin .495" 3.03"
30-'06Springfield .473" 3.34"
30Gibbs .471" 3.34"
300SAUM .534" 2.83"
7.82Patriot. .577" 2.8"
300WSM .535" 2.86"
30-338WinMag .532" 3.34"
308NormaMag .532" 3.28"
300H&H .532" 3.65"
300WinMag .532" 3.34"
300WbyMag .53" 3.56"
300RUM .534" 3.6"
300Dakota .545" 3.43"
7.82Warbird .577" 3.6"
30-378WbyMag .603" 3.67"
7.62x45Czech .441" 2.45"
7.62x39Russian .443" 2.19"
303Brit .525" 3.08"
7.7mmJapanese .471" 3.17"
7.65ArgentineMauser .473" 2.95"
310Cadet .405" 1.59"
8x57Mauser .473" 2.99"
8mm-'06Spr .473" 3.18"
8x60S .473" 3.1"
8x64Brenneke .52" 3.65"
8x64Sauer .499" 3.2"
8x68SMag .524" 3.4"
8mmRemMag .532" 3.6"
318WestleyRichards .465" 3.35"
 
Brownells for bolt heads. The savage dealer here won’t sell you one unless you send it in and they headspace the rifle. Does this cil use standard savage bolt heads?
 
Back
Top Bottom