Savage barrel vise and go-no go gauges?

[Brianma65]

Hey folks,anybody know where I could get an barrel vice/ block,and a set of .308 no-go gauges.
Savage 10 TR.
Thanks

 

[guntech]

My experience has shown you may need more than that... a barrel vise, a nut wrench, and an action wrench is sometimes required.

 

[Brianma65]

My experience has shown you may need more than that... a barrel vise, a nut wrench, and an action wrench is sometimes required.

Yes sorry about the wrong info.

I’m looking for a barrel vise.

Brownells has them,but I was wanting to get one in Canada ,if possible.

I already have the wrench.

 

[d4dave1]

I recently bought my .308 Go - No Go gauges from Mystic Precision. $35 each. I bought a barrel vise from a member on here in the EE parts section.
Dave

 

[Brianma65]

I recently bought my .308 Go - No Go gauges from Mystic Precision. $35 each. I bought a barrel vise from a member on here in the EE parts section.
Dave

Thanks , that’s where the barrel is coming from.

 

[Pax+Caritas]

I have a barrel vise, gauges, but no wrench, so if you want to meet up, maybe we can do both our rifles.

I found a Savage barrel smooth nut wrench for sale in the US, but they won't ship to Canada, and I was hoping to re-use the smooth barrel nuts on my 10TRs.

 

[maynard]

If you need a no-go gauge you are already screwed. Use a go gauge and put a piece of scotch tape on the back. If the bolt closes with tape on the back you have too much headspace.

 

[Brianma65]

I have a barrel vise, gauges, but no wrench, so if you want to meet up, maybe we can do both our rifles.

I found a Savage barrel smooth nut wrench for sale in the US, but they won't ship to Canada, and I was hoping to re-use the smooth barrel nuts on my 10TRs.

Hey thanks for the offer, but I got a new skitter nut.
I did get the smooth one off though, using vice grips.

It’s still useable, but marred up a bit.

 

[Shawn_338]

Call Gary at bighorn he has everything you need

 

[titch--]

Ive been meaning to get a wrench and gauges for awhile now. Thanks for the reminder

 

[klrklr]

View attachment 172488

Yes sorry about the wrong info.

I’m looking for a barrel vise.

Brownells has them,but I was wanting to get one in Canada ,if possible.

I already have the wrench.

forget the barrel vise just get the wheeler receiver wrench got it for $100 cdn shipped in 2 days from amazon prime worked like a charm with the barrel nut wrench