Undergiver
CGN Ultra frequent flyer
- Location
- Sturgeon County, AB
Took mine out this weekend and I was very impressed. 1 MOA at 100m and that was with surplus ammo.
Savage Model 10TR, 308 WIN, 24" Barrel, Military/LE Promo Only
- Thread starter Chemist
- Start date
- Status
- Location
- Richmond, BC
any savage love for left handed people?
I haven't heard of the 10TR coming in LH.
Is there a 20Moa rail available for this? and what is the length of the action
Thank you.
Thank you.
HERE IS THE LINK to download the form you need to fill out after ordering online.
FORM
You can email us the completed form or fax it at 613-372-1331.
If you are military out your service number in the badge number line.
JUST ADDED!!! After talks with Savage, this is now open to retired LE and Military as well.
This is a Military and Law Enforcement promotion being run by Savage. It is open to current and retired members of the military and law enforcement officers. You will be required to provide identifications and or a badge number to purchase this firearm. Cost is $599.00 plus shipping.
UPDATE POST #310! They are here!
Once your order is placed we will email you the form to fill and the fax number/email address to send it to.
http://www.theammosource.com/index.php?main_page=product_info&cPath=269_593&products_id=3366
Calibre: 308 Win
Metal Finish: Matte Blued
Barrel: 24" Heavy Barrel 1-10" Twist Treaded for 5/8-24 Muzzle Device
Base: 1 Piece
Trigger: 2 1/2 lb AccuTrigger
Bolt Release: Front Of Trigger Guard
Stock: Black Synthetic Accustock, Beavertail Forend, (3) Swivel Studds,
Magazine: Detachable Box (4 rounds)
Bolt Handle: Oversized Tactical
Accuracy: Sub MOA
juancarlos
CGN frequent flyer
- Location
- The Island
EGW maybe. .308 is a Short Action.
I am retired military and can provide my service number. Will savage offer it in L/H as well, I love savage but would really like in L/H.
Disregard, just saw post above. To bad my whole military career I had to make adjustments, in retirement would be nice to not have to reach across
Bigmo
Disregard, just saw post above. To bad my whole military career I had to make adjustments, in retirement would be nice to not have to reach across
Bigmo
TimberWolf_3063
CGN Regular
- Location
- Victoria, B. C.
Well, here it is...ready for all its new parts to go on...
As you can see from left to right...TAC PRO DIY Kydex cheekrest kit, 2x Dark Eagle Custom 10rd mags (waiting for more), Dark Eagle Custom extended mag release (already installed), Weaver Tactical rings w/ Vortex Viper HS 6-24x50, VMR-1 reticle, MOA, SFP scope, Harris Series 1A2 9-13" bipod, and eBay special .308 muzzlebrake w/ extra crush washers.
Aside from the mag release, the rifle is completely stock...haven't even shot it yet, but taking it apart to install the mag release was a good chance to tighten everything up and give it a few drops of Loc-Tite. I also removed, cleaned and reinstalled the scope rail (as many people have found, it was almost FLOATING on oil), and I pulled the styrofoam from the buttstock and filled the cavity with the crack sealant (Great Stuff I think) you see in the yellow-top can on the left.
All the parts are now installed, and this is what she looks like...
BTW I apologize for the lighting here...I would have done this outside, but I drilled the stock and filled it with the foam outside yesterday, and already got funny looks from the neighbours. My backyard has no privacy.
I especially like the muzzlebrake. It looks like the Savage .300WM one...I wanted one of those, but it's the same as for the .338, so probably won't do much for a .308 if the hole is too big. This one was $20 on eBay.
I'll take her out soon, break her in and report back...then it's time for the next step.
As you can see, I bought some spraypaint in camo colours. I am planning on a DIY camo job a la Shooter (cue haters). I picked up some scrub brush and dead grass from around here, and some sagebrush from Kamloops, and bought the corresponding colours...I'm going to try out both patterns on cardboard and post the results, see which I like better. If something goes wrong, the thing cost me $600...better to do it on here than on my $1200 Rem 700 5R.
Stay tuned!
As you can see from left to right...TAC PRO DIY Kydex cheekrest kit, 2x Dark Eagle Custom 10rd mags (waiting for more), Dark Eagle Custom extended mag release (already installed), Weaver Tactical rings w/ Vortex Viper HS 6-24x50, VMR-1 reticle, MOA, SFP scope, Harris Series 1A2 9-13" bipod, and eBay special .308 muzzlebrake w/ extra crush washers.
Aside from the mag release, the rifle is completely stock...haven't even shot it yet, but taking it apart to install the mag release was a good chance to tighten everything up and give it a few drops of Loc-Tite. I also removed, cleaned and reinstalled the scope rail (as many people have found, it was almost FLOATING on oil), and I pulled the styrofoam from the buttstock and filled the cavity with the crack sealant (Great Stuff I think) you see in the yellow-top can on the left.
All the parts are now installed, and this is what she looks like...
BTW I apologize for the lighting here...I would have done this outside, but I drilled the stock and filled it with the foam outside yesterday, and already got funny looks from the neighbours. My backyard has no privacy.
I especially like the muzzlebrake. It looks like the Savage .300WM one...I wanted one of those, but it's the same as for the .338, so probably won't do much for a .308 if the hole is too big. This one was $20 on eBay.
I'll take her out soon, break her in and report back...then it's time for the next step.
As you can see, I bought some spraypaint in camo colours. I am planning on a DIY camo job a la Shooter (cue haters). I picked up some scrub brush and dead grass from around here, and some sagebrush from Kamloops, and bought the corresponding colours...I'm going to try out both patterns on cardboard and post the results, see which I like better. If something goes wrong, the thing cost me $600...better to do it on here than on my $1200 Rem 700 5R.
Stay tuned!
The gunsmith stripped 3 drivers trying to get them out. The Hulk did a great job and would have needed to drill them out, too
One of mine came out quite easily. The other 3 came out in a friendly manner after a little heat was applied
I had mine shooting out to 600yds last weekend. Consistently getting headshots on a Fig.11 target after dialing in the correct DOPE.
44.5 gr Varget
2.8" OAL
155gr Hornady A-Max
IVI brass
CCI Large Rifle Primers.
-Still need to chrony it
I am pretty happy with it, but I have some learning to do!
44.5 gr Varget
2.8" OAL
155gr Hornady A-Max
IVI brass
CCI Large Rifle Primers.
-Still need to chrony it
I am pretty happy with it, but I have some learning to do!
- Status
