scope for my xcr

[Bare]

I have on order a LEUPOLD MARK AR for my XCR. It is a 3-9x40 and has BDC turrets for the 55 gr 223 rounds. Anyone have one. What do you think it. The cost is around 400 bucks and has the same leupold guarantee as the rest of there line.

 

[evan the cdn]

That's the first I've heard of them. Looks like a pretty safe bet.
www.leupold.com/tactical/products/scopes/mark-AR-riflescopes/mark-ar-1-5-4x20mm/
www.leupold.com/tactical/products/scopes/mark-AR-riflescopes/mark-ar-3-9x40mm/

 

[b_w.]

how do you like it?

 

[blupul]

I Have an xcr with an 3200 elite 5-15 . i wouldnt spend alot of money scoping an xcr unless you plan on using it on a different rifle. this is my second xcr and there not really accurate 2-3 inch groups at 100 yrds. With match ammo in this case its the gun not the shooter. i have more than 3000rds though my xcrs

 

[starpuss]

I Have an xcr with an 3200 elite 5-15 . i wouldnt spend alot of money scoping an xcr unless you plan on using it on a different rifle. this is my second xcr and there not really accurate 2-3 inch groups at 100 yrds. With match ammo in this case its the gun not the shooter. i have more than 3000rds though my xcrs

i thought they would do 1.5-2" at 100?

 

[hutchster]

i have a bushnell 6500 2.5-16x42 on my xcr(we are talking about the robarms xcr, not the remington bolt gun right?) and it shot 1" 5 shot groups at 100 meters the first time i had it out zeroing the scope.

mind you, after getting the scope zeroed i only had 15 rounds left, but all 3 - 5 shot groups were right at the inch mark

this was using reloads with 40 gr. nosler ballistic tip's, and shooting off a bipod and rear sand bag.

 

[blupul]

I might have to start reloading . most of the nice ammo i can find is above 55 grain . Maybe some lighter loads are needed . ive kept all the brass i could find probably 2000 +

 

[Satain]

I Have an xcr with an 3200 elite 5-15 . i wouldnt spend alot of money scoping an xcr unless you plan on using it on a different rifle. this is my second xcr and there not really accurate 2-3 inch groups at 100 yrds. With match ammo in this case its the gun not the shooter. i have more than 3000rds though my xcrs

Did you install the new trigger system on it yet to reduce the trigger pull? How about adjusting the gas valve? From what I seen and shot with this rifle 2" seems to be the norm with factory fmj's 55gr.

 

[blupul]

New Trigger gas valve on three i never shoot from a rest or with bags though . i can group better with my other rifles usually around an inch my xcr just seems to be all over the place. the worst groups i had were with american eagle fmj 55 grain

 

[Satain]

That dosn't sound right at all. I would drop XCRMonger a pm and ask for some input. She is very nice gal and would be the best shot for fixing what ever is wrong with it.