Scoping out SL-8

The ACOG does sit high on the rifle but it can't be helped as the rail is very high on the rifle. I would guesstimate that it is about 2" over bore (still pretty high) Problem with rail is that most optics' obj bells will hit the rail unless I use very high rings. Hence why I was asking what most guys with SL-8s are using for optics because I am having problems mounting the scope low to the bore... So general consensus is move the ACOG back to AR and get another scope?
 
I went to a cheapie Tasco that goes 6x24. It fits and it ain't that bad for a bargain basement scope. Smacking the gongs at 300 is child's play off the bipod.
 
:redface: I haven't fired mine yet too busy on course at work (LAV III Gnr Crse) and I want to put some good optics on it first before I take it to the range to zero it.
 
how are these for cleaning i heard that the G36 action requires vary little cleaning how bad is it after a day of hard use say 1000 rnds
 
Rohan, mine is solidly in the 3/4" MOA range. My load is a Horn. 75gr. HPBT match bullet, 23.8 gr W748, in a WW case wth a Federal Match primer. Off the bipod I open up the groups a bit to a little over 2 inches at 200.

I am really beginning to love the way this rifle handles off hand too. To begin with it was very uncomfortable to shoot.
 
You must log in or register to reply here.
Back
Top Bottom