Scorpio em332x

[monster2004]

Dear friends, I need your help. While cleaning my wife's rifle, I lost a part of the bolt called a "cartridge retainer," and I really don't know where to find one. Do you have any suggestions?
It's the number 14 in the picture.
Thanks

 

[KyleSchenk]

Not good. Unfortunately that's one I don't have any spares of. Try contacting sfrc and see if they can hook you up

 

[Buck1950]

Look again - it's probably 'under' the edge of some furniture, counter, etc. If over carpet, maybe a vacuum will help find it. They really don't grow legs I often find parts the next day, too.

 

[SaddleTramp]

Try a magnet around your work area

 

[Mysticprecision]

contact Nordic Marksmen and see if you can get an extractor claw for the older Annie 54 sporter action. some fitting may be required but it should be pretty close for fit (unless the Chinese have changed to a completely new style and then you will need to see who might have parts from your generation of rifle)

Jerry

 

[monster2004]

contact Nordic Marksmen and see if you can get an extractor claw for the older Annie 54 sporter action. some fitting may be required but it should be pretty close for fit (unless the Chinese have changed to a completely new style and then you will need to see who might have parts from your generation of rifle)

Jerry

Thank you very much

 

[grauhanen]

If the missing part is #14, it's not the extractor as suggested above. As noted in the OP it's the cartridge retainer, a part that's not the same as the extractor.

Unfortunately, the Nordic Marksman website shows both these parts to be out of stock.
The cartridge retainer https://nordicmarksman.com/3-cartridge-retainer/
The extractor https://nordicmarksman.com/2-extractor/

 

[monster2004]

If the missing part is #14, it's not the extractor as suggested above. As noted in the OP it's the cartridge retainer, a part that's not the same as the extractor.

Unfortunately, the Nordic Marksman website shows both these parts to be out of stock.
The cartridge retainer https://nordicmarksman.com/3-cartridge-retainer/
The extractor https://nordicmarksman.com/2-extractor/

Perfect, thank you very much, I will contact them

 

[sillymike]

Looking at some parts diagram for Anschutz 54 action with dual extractor
- They sure look quite similar, with a different angle

 

[Jahnj0584]

With how cheap they are, I'd say its just time to clean up that room. It didn't disappear into the nether.

 

[Buck1950]

For 'tiny stuff' I also use a Magnet and sometimes a 'powerful flashlight' held Horizontally across the floor - some springs and pins are small enuf to need that. I really should get a plastic tarp to cover ALL my workshop floor

 

[sillymike]

Somewhere in the shop, I've got something like this... but homemade, with and old broom, some cart-wheels and a 18" magnetic tool holder I had laying around

 

[monster2004]

Thanks for the advice, I'll keep looking.

 

[Buck1950]

sillymike - We use one of those from Princess to pickup x39 cases at the range. Better than crawling around in the gravel

 

[jjohnwm]

Just sell the dang gun. Then you'll find that stupid part as soon as you get back from mailing the package.

Tiny lost parts do not grow legs...they grow wings, and also seem capable of interdimensional teleportation...

 

[Longstud]

If your thinking of upgrading the stock, a member on here has one on the EE. Its been bumped a few times(38) so maybe he will reduce the price for you! After all " If youve bumped your EE add more then(than) twice maybe its time to lower your asking price there bud" Now thats funny

 

[monster2004]

Quick update... I found the cartridge retainer and the spring... however, the small plunger that secures the retainer is missing... it's somewhere... it's extremely small... so... it's in my garage... well hidden

 

[monster2004]

And, if I'm going by the parts diagram for the Anschutz 54, it's the same plunger, and it's available for 14.95, so I'm saved! My wife isn't going to kill me!!

 

[Buck1950]

". . . My wife isn't going to kill me!! . . " Until she steps on that runaway plunger