Scorpio SKS-15 7.62x39mm Non-Restricted

[TERMINATOR101CA]

Lipstick on a pig?

I'd say liposuction and a boob job...but same idea nonetheless.

 

[Deckard]

Nice.

 

[hairbear]

Great catch about the mag release. Same question.

 

[rubberdonuts]

So how do the xcr mags run with one less round? Is it a mag issue or a rifle issue when some run and others don't?

I currently run my 10 rnd XCR mags to 8/10 but no more than 9/10 due to feeding issues. It has to be due to the round. I have 4 XCR mags and 1 NEA mag. Spent a few range trips trying to diagnose my Gen 2 NEA. Changed buffer weights, polished feed ramps, and even thru on a noveske pig for that extra pressure. Still didn't fix it, sure looks cool tho. In the end it was the mags. Being ASC or C Products or NEA it doesn't matter. Some mags just don't work. I've been debating buying another 5 mags of the new stock stores received these past few months to further engage this problem but I'm thinking it's cheaper to just swap out the barrel to 556 and be done with it entirely. Currently going on 600 rounds not a single jam using Barnaul and Norinco non corrosive since i started loading 1-2 less. Still better than 5 rounds.

 

[joe09]

Clean up looks difficult ! So many screws ....

 

[Tvw]

Looks good!

 

[kornwardrobe]

Interesting

 

[crashcollins]

Great catch about the mag release. Same question.

Guy in the photos answered already way back on page 2. For what they started with there are going to be compromises to go tacticool. Not for everyone but a nice try and will probably sell.

 

[Chemist]

I have played with this, I haven't shot it yet, and it seems really nice. I thought it was going to be heavy but it's much lighter than I thought. The machining is nice and over all it looks to be a nice quality piece.

 

[North_Sylva]

Is the chassis available on its own?

As mentioned in the video the receiver has to be modified to fit, therefore this is not a drop-in chassis and will only be available as a complete gun. Thanks.

 

[Stevo]

If your XCR mags don't feed properly when full, just trim the springs a bit. It's not rocket science.

 

[liboathfx]

Great looking rifle! I like the threaded barrel, the ability to use XCR mags, lighter weight and especially the price! Cleaning may be difficult but I am going to use non-corrosive anyway.

However, my biggest concern is that since the rail is not directly attached to the receiver, would it hold zero after removing/installing the chassis?

 

[Grove]

Gotta say......that is one wicked setup ya got there.

Very impressed so far, can't wait to see videos of this in use.

 

[kablam]

What's wrong with the wood stock it comes with? Why is everyone trying to "ninjafy" this rifle?

"Kardashify"

Why You Shouldn't Get Into Guns

 

[Bonjour43ma]

Curious to know how it disassembles for cleaning.


And the accuracy

And reliability

 

[Mikeschurman]

Any chance of seeing one that takes AK mags in the future?

and of course other colors?

I'd like to see a one of these use ak mags too. if there is feeding problems and you can't put in 10 in the xcr mag whats the point for a few extra rounds. You might as well have one that uses an an ak mag. At least they seem to work, my sks d runs just fine

 

[Robert777]

I think this looks like a fun gun. And it will sell.

 

[Gatehouse]

All my pistol mags run fine with nine rounds. Some work fine with ten. If ten is important, just play with the mags that only hold nine. Just make sure you don't turn them to eleven

 

[9mmGunGuy]

I currently run my 10 rnd XCR mags to 8/10 but no more than 9/10 due to feeding issues. It has to be due to the round. I have 4 XCR mags and 1 NEA mag. Spent a few range trips trying to diagnose my Gen 2 NEA. Changed buffer weights, polished feed ramps, and even thru on a noveske pig for that extra pressure. Still didn't fix it, sure looks cool tho. In the end it was the mags. Being ASC or C Products or NEA it doesn't matter. Some mags just don't work. I've been debating buying another 5 mags of the new stock stores received these past few months to further engage this problem but I'm thinking it's cheaper to just swap out the barrel to 556 and be done with it entirely. Currently going on 600 rounds not a single jam using Barnaul and Norinco non corrosive since i started loading 1-2 less. Still better than 5 rounds.

What gun are you using?

 

[Rashed]

Not sure if I like it