Scorpio SKS-15 7.62x39mm Non-Restricted

[HobbesT]

This looks good. I'd never buy a regular SKS as they just don't appeal to me but I like this arrangement.

 

[reddog9x19]

Looks good. I like!!!

 

[Grove]

Thanks for everyone's feedback. We are currently busy working on several videos showing reliability at the range as well as the disassembly process. Please stay tuned.

Also we would like to mention that each receiver is hand fitted to the chassis, and the rifle will hold zero after disassembly.

Will the chassis be available separately for those who dont mind fitting it themselves?

I have my own milling machine so that sort of work is no issue at all.

 

[liboathfx]

Thanks for everyone's feedback. We are currently busy working on several videos showing reliability at the range as well as the disassembly process. Please stay tuned.

Also we would like to mention that each receiver is hand fitted to the chassis, and the rifle will hold zero after disassembly.

Fantastic! I can't find an excuse not to buy one then ...

 

[Brian46]

Thanks for everyone's feedback. We are currently busy working on several videos showing reliability at the range as well as the disassembly process. Please stay tuned.

Also we would like to mention that each receiver is hand fitted to the chassis, and the rifle will hold zero after disassembly.

Is the barrel retained differently on these than an sks? By "hand fitted" is the slop taken out of the reciever?

These are the two reasons why sks accuracy is poor in the first place.

 

[North_Sylva]

Will the chassis be available separately for those who dont mind fitting it themselves?

I have my own milling machine so that sort of work is no issue at all.

This is only being sold as a complete rifle.

 

[Grove]

This is only being sold as a complete rifle.

I can only hope in the future they are available separately.

Thanks a ton regardless, that chassis is a whole lot of kick ass!!!

 

[North_Sylva]

We will have more videos coming but here is a quick video on the disassembly process.

 

[9mmGunGuy]

We will have more videos coming but here is a quick video on the disassembly process.

Seems simple.

 

[SuperP@t]

( Seems simple. )

Not really... Reminds me of the Mossberg 715T takedown procedure. With time. screwing/unscrewing
uses threads ...

 

[GUB]

O.K. So non-corrosive ammo and clean once a year.. Is there any torque specs ? Or does it matter?
How many mags are coming with the gun?

 

[j_06]

We will have more videos coming but here is a quick video on the disassembly process.

Seems like a lot to take down/loose/strip/mar before you actually take anything down.

 

[Unhinged]

No no this is super slick, thanks NS!

 

[liboathfx]

I image that assembly may be more difficult, since you need to align all those holes up?

 

[Jerry Champagne]

Shes ugly thats 4 sure

 

[Gatehouse]

Looks like a bit of a process to disassemble, so the solution is to use non corrosive, and only do a full tear down after each case. Or half case if you are the persnickety type

 

[Bonjour43ma]

Holy batman that disassembly. Like the FN FNAR.

Not bad looking but the take down and reassembly will be a pain.

 

[ShotgunNut]

The ejection path is partially obstructed so lets see how many rounds it shoots until it stovepipes before spending the money.

 

[Armedsask]

But why?

 

[Deckard]

This could be a research project for a new ground up system without the SKS guts.